Items where Division is "Kulliyyah of Engineering" and Year is 2009

Article

, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2009) Remote operation of CNC milling through virtual simulation and remote dekstop interface. World Academy of Science, Engineering and Technology, 53. pp. 64-67. ISSN 1307-6884

Abd. Rahman, Mohamed and Mohd Salit, Sapuan and Mridha, Shahjahan and Abdan, Khalina (2009) Characterization of pineapple leaf fibers from selected Malaysian cultivars. Journal of Food, Agriculture & Environment, 7 (1). pp. 235-240. ISSN 1459-0263 (O), 1459-0263 (P)

Abdelrahman, Mohammad and Park, Sang-Young (2009) Unscented kalman filtering for spacecraft attitude and rate determination using magnetometer. Journal of Astronomy and Space Sciences(The Korean Space Science Society KSSS), 26 (1). pp. 31-46.

Abdullah, Khaizuran and Mahmoud, Seedahmed and Hussain, Zahir (2009) Performance analysis of an optimal circular 16-QAM for Wavelet Based OFDM Systems. International Journal of Communications, Network and System Sciences, 2 (9). pp. 836-844. ISSN 1913-3715 E-ISSN 1913-3723

Abeysekera, Saman S. and Sharif, Md. Raihan (2009) Efficient wideband parameter estimation using arbitrary enveloped LFM signals via hermite decompositions. IEEE Journal of Oceanic Engineering, 34 (1). pp. 63-74. ISSN 0364-9059

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and Agusman, Delvis and Yahuza, Rosehan (2009) Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles. European Journal of Scientific Research, 38 (2). pp. 180-188. ISSN 1450-216X E-ISSN 1450-202X

Ahmad Tarmizi, Nor Hafizah and Jamal, Parveen and Mohamed Ismail, Abdul Karim and Sopyan, Iis (2009) Tio2 powder photocatalyst from sol-gel route and its immobilisation with cement for photocatalytic phenol removal. Journal of the Institution of Engineers, Malaysia, 70 (4). pp. 49-56. ISSN 0126-513X

Ahmed, Mirghani Ishak and Hrairi, Meftah and Ismail, Ahmad Faris (2009) On the characteristics of multistage evacuated solar distillation. Renewable Energy, 34. pp. 1471-1478. ISSN 0960-1481

Ahmed Kabashi, Nassereldeen and Alam, Md. Zahangir and Mirghani, Mohamed Elwathig Saeed and Al-Fusaiel, A. M. A. (2009) Biodiesel production from crude palm oil by transesterification process. Journal of Applied Sciences, 9 (17). pp. 3166-3170. ISSN 1812-5662 (O), 1812-5654 (P)

Ahmed Kabashi, Nassereldeen and Hamid Nour, Abdurahman and Muyibi, Suleyman Aremu and Qudsieh, Isam Y. (2009) Development of a wastewater treatment system for chromium removal using chitosan. International Journal of Chemical Technology, 1 (2). pp. 44-51. ISSN 2152-3304 (O), 1996-3416 (P)

Ahmed Kabashi, Nassereldeen and Muyibi, Suleyman Aremu and Mirghani, Mohamed Elwathig Saeed and Yahya, Farhana I. (2009) A study on removal characteristics of (Mn2+) from aqueous solution by CNT. World Academy of Science, Engineering and Technology, 59. pp. 349-353. ISSN 1307-6884

Ahsan, Md. Rezwanul and Ibrahimy, Muhammad Ibn and Khalifa, Othman Omran (2009) EMG signal classification for human computer interaction: a review. European Journal of Scientific Research, 33 (3). pp. 480-501. ISSN 1450-216X, 1450-202X

Al-Marzouk, Maan Ibrahim and Al-Azzawi, Haitham J (2009) The Effect of the Surface Roughness of Porcelain on the Adhesion of Oral Streptococcus mutans. The Journal of Contemporary Dental Practice, 10 (6). pp. 17-24. ISSN 1526-3711

Al-khateeb, Mohammed K. and Hassan Abdalla Hashim, Aisha (2009) A Fuzzy-based mobility prediction in the IEEE 802.16e. International Journal of Communication Networks and Information Security (IJCNIS), 1 (1). pp. 14-19. ISSN 2073-607

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul and Khan, Sheroz and Mohd Sahar, Norsuzlin and Zamani, Norasyikin (2009) Effects of MEMS material on designing a multi-band reconfigurable antenna. Iranian Journal of Electrical and Computer Engineering, 8 (2). pp. 112-118. ISSN 1682-0053

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul and Khan, Sheroz and Nik Mohd. Salleh, Nik Nor Atikah and Aziz, Noraini (2009) Tunable bandpass filter using RF MEMS switches. IIUM Engineering Journal, 10 (2). pp. 69-80. ISSN 1511-788X

Alam, A. H. M. Zahirul and Lawal, Wahab Adetunji and Khan, Sheroz and Rashid, Muhammad Mahbubur (2009) Design of multi-valued quaternary based analog-to-digital converter. American Journal of Applied Sciences , 6 (8). pp. 1522-1527. ISSN 1554-3641(O), 1546-9239 (P)

Ali, Mohammad Yeakub (2009) Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling. International Journal of Mechanical and Materials Engineering (IJMME), 4 (1). pp. 93-97. ISSN 1823-0334

Ali, Mohammad Yeakub and Hamad, Mohd Hosni and Karim, Ahmad Izwan (2009) Form characterization of microhole produced by microelectrical discharge drilling. Materials and Manufacturing Processes, 24 (6). pp. 683-687. ISSN 1042-6914

Ali, Sellami and Saharudin, Shuhairi and Wahiddin, Mohamed Ridza (2009) Implementation of decoy state protocol. European Journal of Scientific Research, 33 (1). pp. 183-186. ISSN 1450-216X, 1450-202X

Ali, Sellami and Saharudin, Shuhairi and Wahiddin, Mohamed Ridza (2009) Quantum key distribution using decoy state protocol. American Journal of Engineering and Applied Sciences, 2 (4). pp. 694-698. ISSN 1941-7020

Amid, Azura (2009) Halal meats and frozen foods: the halal abattoir, packaging, storage and handling. Halal Pages 2009/2010. pp. 18-25. ISSN 1675-2465

Amid, Azura and Jamal, Parveen (2009) Optimization of the elicitation process on chrysanthemum indicum cell suspension culture producing xanthine oxidase inhibitor. Journal of Applied Sciences, 9 (12). pp. 2256-2263. ISSN 1812-5662 (O), 1812-5654 (P)

Anwar, Farhat and Rahman, Md. Arafatur and Azad, Md. Saiful (2009) Multibiometric systems based verification technique. European Journal of Scientific Research, 34 (2). pp. 260-270. ISSN 1450-216X, 1450-202X

Azad, Md. Saiful and Anwar, Farhat and Rahman, Md. Arafatur (2009) Performance of ad hoc routing protocols in mobile WiMAX environment. Lecture Notes in Electrical Engineering, 33. pp. 53-65. ISSN 1876-6100

Azad, Md. Saiful and Anwar, Farhat and Rahman, Md. Arafatur and Hassan Abdalla Hashim, Aisha and Priantoro, Akhmad Unggul and Mohamed, Omer Mahmoud (2009) Performance comparison of proactive and reactive multicast routing protocols over wireless mesh networks. International Journal of Computer Science and Network Security (IJCSNS), 9 (6). pp. 55-62. ISSN 1738-7906

Azmi, Azlin Suhaida and Hasan, Masitah and Mel, Maizirwan and Ngoh, Cheng (2009) Single-step bioconversion of starch to bioethanol by the coculture of ragi tapai and saccharomyces cerevisiae. Chemical Engineering Transactions, 18. pp. 557-562. ISSN 1974-9791

Elabdin, Zain and Islam, Md. Rafiqul and Khalifa, Othman Omran (2009) Signal attenuation due to duststorms at KA band. Sudan Engineering Society Journal, 53 (56). ISSN 0049-246

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali (2009) Comparison of high-order accurate schemes for solving the nonlinear viscous burgers equation. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2535-2543. ISSN 1991-8178

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Analysis of semi-active suspension systems for four-axles off-road vehicle using half-model. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 91-115. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry and El Hawari, Yaser and Ihsan, Sany Izan (2009) Technology transfer: challenges and prospective Arab world as a case study. International Journal of Arab Culture, Management and Sustainable Development, 1 (2). pp. 195-207. ISSN 1753-9420 (O), 1753-9412 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) Transient and steady state dynamic analysis of passive and semi-active suspension systems using half-car model. International Journal of Modelling, Identification and Control, 6 (1). pp. 62-71. ISSN 1746-6180 (O), 1746-6172 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-148X (O), 1479-1471 (P)

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Che Daud, Mohd Radzi and Lajis, Mohd Amri (2009) Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts. European Journal of Scientific Research, 28 (4). pp. 542-551. ISSN 1450-216X, 1450-202X

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2009) Improved tool life in end milling Ti-6A1-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Ginta, Turnad Lenggo and Lajis, Mohd Amri and Amin, A. K. M. Nurul (2009) The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating. American Journal of Engineering and Applied Sciences, 2 (1). pp. 147-153. ISSN 1941-7020

Hameed, Shihab A. and Zaidan, B.B. and Zaidan, A.A. and Naji, Ahmed Wathik and Faroq, Omar (2009) Novel simulation framework of three-dimensional skull bio-metric measurement. International Journal on Computer Science and Engineering, 1 (3). pp. 269-274. ISSN 2229-5631

Hasan, Muhammad Asfarul and Ibrahimy, Muhammad Ibn and Reaz, Mamun Ibn (2009) An efficient method for fetal electrocardiogram extraction from the abdominal electrocardiogram signal. Journal of Computer Science, 5 (9). pp. 619-623. ISSN 1549-3636

Hasan, Muhammad Asfarul and Reaz, Mamun Ibn and Ibrahimy, Muhammad Ibn and Hussain, Mohammed Sazzad and Uddin, Md. Jasim (2009) Detection and processing techniques of FECG signal for fetal monitoring. Biological Procedures Online, 11 (1). pp. 263-295. ISSN 1480-9222

Hasan , M. A. and Ibrahimy, Muhammad Ibn and Reaz, M. B. I. (2009) A single link flexible manipulator control using fuzzy logic. International Journal of Electronics, Electrical and Communication Engineering, 1 (1). pp. 13-21. ISSN 0975-4814

Hashim, Yumi Zuhanis Has-Yun (2009) Halal cosmeceuticals: the vogue and the vague. Halal Pages 2009/2010. pp. 50-55. ISSN 1675-2465

Hassan Abdalla Hashim, Aisha and Hassan, Wan Haslina and ., Syed Sulaiman and Mudathir, Muhammad A.F. (2009) A HMRSVP approach to support QoS challenges in mobile environment. International Journal of Computer Science and Network Security (IJCSNS), 9 (1). pp. 69-73. ISSN 1738-7906

Hossain, Altab and Rahman, Mohammed Ataur and Rahman, Md. Mozasser and Hasan, SK. and Hossen, Md. Jakir (2009) Prediction of power generation of small scale vertical axis wind turbine using fuzzy logic. Journal of Urban and Emvironmental Engineering, 3 (2). pp. 43-51. ISSN 1982-3932

Ibrahimy, Muhammad Ibn (2009) Fetal ECG extraction from maternal abdominal ECG using neural network. Journal of Software Engineering and Applications, 2 (5). pp. 330-334. ISSN 1945-3116

Ibrahimy, Muhammad Ibn and Hasan, Muhammad Asfarul and Ullah, Mohammad Habib (2009) Design of an automated rail transit system controller: Malaysia perspective. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3500-3509. ISSN 1991-8178

Ihsan, Sany Izan and Ahmadian, Mehdi and Faris, Waleed Fekry and Blancard, E. D. (2009) Ride performance analysis of half-car model for semi-active system using RMS as performance criteria. Shock and Vibration, 16. pp. 593-605. ISSN 1070-9622

Jaswir, Irwandi (2009) General guidelines for halal food preparation: unified standard of halal certification is important to globalize halal products. Halal Pages 2009/2010. pp. 38-42. ISSN 1675-2465

Jaswir, Irwandi (2009) Halal processed food and beverages: some concerns on food additives and ingredients. Halal Pages 2009/2010. pp. 32-34. ISSN 1675-2465

Jaswir, Irwandi (2009) "Vegie gelatin", why not?: extensive research to explore the potential of Malaysian plants. Halal Pages 2009/2010. ISSN 1675-2465

Jaswir, Irwandi and S., Faridayanti and Mirghani, Mohamed Elwathig Saeed and Mohd. Salleh, Hamzah and Hassan, Torla and Yaakob, Che Man (2009) Extraction and characterization of gelatin from different marine fish species in Malaysia. International Food Research Journal, 16. pp. 381-389. ISSN 19854668 (P), 22317546 (O)

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2009) A study of electrode shape configuration on the performance of die sinking EDM. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 19-23. ISSN 1823-0334

Khan, Sheroz and Salami, Abdulazeez F. and Lawal, Wahab Adetunji and Alam, A. H. M. Zahirul and Abdel Hameed, Shihab and Salami, Momoh Jimoh Emiyoka (2009) Characterization of indoor power lines as data communication channels experimental details and results. International Journal of Electrical and Computer Engineering, 4 (10). pp. 647-651. ISSN 0974-2190

Kien, Tat Wai and Idris, Azni and Megat Johari, Megat Mohd Noor and Mohammad, Thamer A. and Ghazali, Abdul Halim and Muyibi, Suleyman Aremu (2009) Evaluation on different forms of Moringa Oleifera seeds dosing on sewage sludge conditioning. Desalination and Water Treatment, 10. pp. 87-94. ISSN 1944-3994 (O), 1944-3986 (P)

Kiran, Maleeha and Hassan Abdalla Hashim, Aisha and Lim, Mei Kuan and Yap, Yee Jiun (2009) Execution time prediction of imperative paradigm tasks for grid scheduling optimization. International Journal of Computer Science and Network Security (IJCSNS), 9 (2). pp. 155-163. ISSN 1738-7906

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Ginta, Turnad Lenggo (2009) Hot machining of hardened steels with coated carbide inserts. American Journal of Engineering and Applied Sceices, 2 (2). pp. 421-427. ISSN 1941-7020

Lajis, Mohd Amri and Che Daud, Mohd Radzi and Amin, A. K. M. Nurul (2009) The implementation of Taguchi method on EDM process of Tungsten Carbide. European Journal of Scientific Research, 26 (4). pp. 609-617. ISSN 1450-216X , 1450-202X

Loh, S.K. and Chin, W. M. and Faris, Waleed Fekry (2009) Fatigue analysis of Package Terminal Air Conditioner motor bracket under dynamic loading. Materials and Design, 30. pp. 3206-3216. ISSN 0261-3069

M I, JAHIRUL and Rashid, Muhammad Mahbubur and R , SAIDUR and H H, MASJUKI (2009) Application of Artificial Neural Networks (ANN) for prediction the performance of a dual fuel internal combustion engine. The Hong Kong Institution of Engineers Transactions, 16 (1). pp. 14-20. ISSN 1023-697X (Print), 2326-3733 (Online)

M. A., Amir and Khan, Ahsan Ali (2009) A study of abrasive water jet machining process on glass/epoxy composite laminate. Journal of Materials Processing Technology, 209 (20). pp. 6168-6173. ISSN 0924-0136

Mel, Maizirwan and Mohd. Salleh, Hamzah (2009) Halal issues in pharmaceutical products: urgent need to have modern and efficient production of pharmaceuticals and biopharmaceuticals. Halal Pages 2009/2010. pp. 56-63. ISSN 1675-2465

Maleque, Md. Abdul and Karim, Md. Rezaul (2009) Wear behavior of as-cast and heat treated triple particle size SiC reinforced aluminium metal matrix composites. Industrial Lubrication and Tribology, 61 (2). pp. 78-83. ISSN 0036-8792

Mazhar, Haya and Hassan Abdalla Hashim, Aisha (2009) Development of an efficient approach to support portability in grid environment. Computer Measurement Group Journal (CMG) (124). pp. 17-22.

Mirghani, Mohamed Elwathig Saeed (2009) Halal food analysis: ensuring food and other consumer goods to be authentically halal. Halal Pages 2009/2010. pp. 44-49. ISSN 1675-2465

Mogaki, Shunsuke and Kamada, Masaru and Yonekura, Tatsuhiro and Okamoto, Shusuke and Otaki, Yasuhiro and Ibne Reaz, Md Mamun (2009) Real-time cheat-free gaming on the basis of time-stamp service. International Journal of Computer Science and Network Security (IJCSNS), 9 (1). pp. 139-146. ISSN 1738-7906

Mohamad Hanif, Noor Hazrin Hany and Elamvazuthi, Irraivan and Sulaiman, Suziah and Shoon, So Oo (2009) Simulation and control of sensory-mode interaction. International Journal of Engineering & Technology (IJET), 9 (10). pp. 61-66. ISSN 2227-2712 E-ISSN 2077-1185

Muhida, Riza and Ali, Maisarah and Jahn Kassim, Puteri Shireen and Abu Eusuf, Muhammad and Sutjipto, Agus Geter Edy and ., Afzeri (2009) A simulation method to find the optimal design of photovoltaic home system in Malaysia, case study: a building integrated photovoltaic in Putra Jaya. World Academy of Science, Engineering and Technology, 53. pp. 694-698. ISSN 1307-6884

Muhida, Riza and Sutjipto, Agus Geter Edy and ., Afzeri and Toyama, T. and Okamoto, Hiroaki (2009) Relationship between average slope of textured substrate and poly-Si thin film solar cells performance. Materials Research Innovations, 13 (3). pp. 246-248. ISSN 1433-075X

Nadir, Najiah and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Mohd Yunus, Rosli (2009) Comparison of sweet sorghum and cassava for ethanol production by using saccharomyces cerevisiae. Journal of Applied Sciences, 9 (17). pp. 3068-3073. ISSN 1812-5662 (O), 1812-5654 (P)

Nadir, Najiah and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Mohd Yunus, Rosli (2009) Process improvement of pharmaceutical grade ethanol production using sweet sorghum. International Journal of Science Engineering and Technology, 2 (1). pp. 57-63. ISSN 1985-3785

Naji, Ahmed Wathik and Gunawan, Teddy Surya and Zaidan, A.A. and O-Khalifa, Othman and Zaidan, B.B. and Al-Khateeb, Wajdi Fawzi Mohammed and Hameed, Shihab A. (2009) New approach of hidden data in the portable executable file without change the size of carrier file using statistical technique. International Journal of Computer Science and Network Security (IJCSNS), 9 (7). pp. 218-224. ISSN 1738-7906

Naji, Ahmed Wathik and Hameed, Shihab A. and Al-Khateeb, Wajdi Fawzi Mohammed and O-Khalifa, Othman and Zaidan , A. A. and Gunawan, Teddy Surya (2009) Novel framework for hidden data in the image page within executable file using computation between advanced encryption standard and distortion techniques. International Journal of Computer Science and Information Security, 3 (1). pp. 1-6. ISSN 1947-5500

Naji, Ahmed Wathik and Zaidan, A.A. and Zaidan, B.B. (2009) Challenges of hidden data in the unused area two within executable files. Journal of Computer Science, 5 (11). pp. 890-897. ISSN 1549-3636

Naji, Ahmed Wathik and Zaidan, B.B. and Hameed, Shihab A. and O-Khalifa, Othman (2009) Novel approach for secure cover file of hidden data in the unused area within EXE file using computation between cryptography and steganography. International Journal of Computer Science and Network Security (IJCSNS), 9 (5). pp. 294-300. ISSN 1738-7906

Noorbatcha, Ibrahim Ali and Masrur Khan, Ayesha and Mohd. Salleh, Hamzah (2009) Homology Modeling Of β-Glucuronidases From E. Coli and T. Maritima. Malaysian Journal os Science, 28. pp. 115-122. ISSN 1394-3065

Noorbatcha, Ibrahim Ali and Samsudin, Nurhusna and Mohd. Salleh, Hamzah (2009) Modification and characterization of phytase for animal feed production. Journal of Applied Sciences, 9 (17). pp. 3080-3085. ISSN 1812-5654 E-ISSN 1812-5662

Nordin, Anis Nurashikin and Voiculescu, Ioana and Zaghloul, Mona E. (2009) Micro-hotplate based temperature stabilization system for CMOS SAW resonators. Microsystems Technologies, 15 (8). pp. 1187-1193. ISSN 0946-7076 (Print), 1432-1858 (Online)

Omar, Ashraf Ali E. and Ong, Jiunn Chit and Asrar, Waqar and Ismail, Ahmad Faris (2009) Accuracy of Bhatnagaar-Gross-Krook scheme in solving laminar viscous flow problems. AIAA Journal, 47 (4). pp. 885-892. ISSN 0001-1452

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Artificial neural network chip serration frequency model in end milling of medium carbon steel. Research Journal of Applied Sciences, 4 (3). pp. 108-112. ISSN 1815-932X

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII, 1. pp. 89-96. ISSN 1584-2665

Qadir, Sana and Siddiqi, Mohammad Umar (2009) Performance evaluation of a secure Low Level Reader Protocol (LLRP) connection. International Journal of Computer Science and Network Security (IJCSNS), 9 (3). pp. 40-49. ISSN 1738-7906

Rahman, Md. Arafatur and Anwar, Farhat and Azad, Md. Saiful (2009) Integrated metric-ad hoc on-demand distance vector: a routing protocol over Wireless Mesh Networks. Journal of Computer Science, 5 (7). pp. 511-518. ISSN 1549-3636

Rahman, Md. Arafatur and Azad, Md. Saiful and Anwar, Farhat (2009) Performance analysis of on-demand routing protocols in wireless mesh networks. Informatica Economica, 13 (2). pp. 120-127. ISSN 1453-1305

Rahman, Md. Mustafizur and Mohd. Ihsan, Ahmad Kamal Ariffin and Abdullah, Shahrir and Mat Noor, Muhamad and Abu Bakar, Rosli and Maleque, Md. Abdul (2009) Assessment on surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp. 715-725. ISSN 1554-3641(O), 1546-9239 (P)

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Yahya, Azmi (2009) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. The Open Mechanical Engineering Journal (3). pp. 63-71. ISSN 1874-155X

Ramasamy, K. and Balamuralithara, B. and Siddiqi, Muhammad Umar (2009) Optimal power allocation for the proposed asymmetric turbo code for 3G systems. International Journal of Electronics and Communication (AEÜ) , 63. pp. 551-661. ISSN 1434-8411

Reaz, Mamun Bin Ibne and Uddin, Md. Jasim and Hussain Shah, Qasim and Nordin, Anis Nurashikin and Ibrahimy, Muhammad Ibn and Mohd-Yasin, Faisal (2009) RFID reader architectures and applications. Microwave Journal, 52 (12). pp. 24-34. ISSN 0192-6225

Reaz, Mamun Ibn and Ibrahimy, Muhammad Ibn and Amin, Nowshad (2009) Fast clock tree generation using exact zero skew clock routing algorithm. Journal of Applied Sciences, 9 (11). pp. 2150-2155. ISSN 1812-5662 (O), 1812-5654 (P)

Salami, Abdulazeez F. and Anwar, Farhat and Priantoro, Akhmad Unggul (2009) An investigation into clustering routing protocols for wireless sensor networks. Sensors & Transducers Journal, 106 (7). pp. 48-61. ISSN 1726-5479

Sarker, Md. Zaidul Islam and Khatib, Alfi and Yuliana, Nancy Dewi and Selamat, Jinap and Jaswir, Irwandi and Wilson, Erica G. and Chung, Shin_Kyo and Verpoorte, Robert (2009) Identification of possible compounds posessing adenosine A1 receptor binding activity in the leaves of orthosiphon stamineus using TLC and multivariate data analysis. Journal of Liquid Chromatography & Related Technologies, 32 (19). pp. 2906-2916. ISSN 1082-6076 (p)1520-572X (o)

Shahi, S. and Harun, S. W. and Lim, K. S. and Naji, Ahmed Wathik and Ahmad, H. (2009) Enhanced four-wave mixing efficiency of BI-EDF in a new ring configuration for determination of nonlinear parameters. Journal of Electromagnetic Waves and Applications, 23 (17-18). pp. 2397-2407. ISSN 0920-5071

Sopyan, Iis and Alqap, Asep Sofwan Faturrahman (2009) Synthetic bone as a solution for halal bone grafts implantation: demand for bone graft has been increasing steadily. Halal Pages 2009/2010. pp. 64-69. ISSN 1675-2465

Toscano, George John and Saha, Pran Kanai and Alam, A. H. M. Zahirul (2009) Design of a high-speed, reconfigurable digital rank order filter. IIUM Engineering Journal, 10 (1). pp. 19-30. ISSN 1511-788X

Uddin, Md. Jasim and Ibrahimy, Muhammad Ibn and Reaz, Mamun Ibn and Nordin, Anis Nurashikin (2009) Design and application of radio frequency identification systems. European Journal of Scientific Research, 33 (3). pp. 438-453. ISSN 1450-216X , 1450-202X

Ullah, Mohammad Habib and Hasan, Muhammad Asfarul and Uddin, Md. Jasim and Priantoro, Akhmad Unggul (2009) VHDL modeling of optimum measurement selection by using genetic algorithm. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3283-3290. ISSN 1991-8178

Ullah, Mohammad Habib and Priantoro, Akhmad Unggul (2009) A review on multiplexing schemes for MIMO channel sounding. International Journal of Computer Science and Network Security (IJCSNS), 9 (6). pp. 294-300. ISSN 1738-7906

Ullah, Mohammad Habib and Priantoro, Akhmad Unggul and Hassan, M. A. and Uddin, Md. Jasim (2009) FPGA implementation of light rail transit fare card controller using VHDL. European Journal of Scientific Research, 36 (1). pp. 30-40. ISSN 1450-216X, 1450-202X

Yahya, Roslan and Sutjipto, Agus Geter Edy and Abdullah , Jaafar and M. Hassan, Nor Pa'iza (2009) Neutron transmutation doped of silicon under Cf-252 isotopic neutron bombardment. Jurnal Sains Nuklear Malaysia, 21 (2). pp. 50-55. ISSN 2232-0946

Book

Mridha, Shahjahan and Ali, Mohammad Yeakub and Afzeri, Afzeri, eds. (2009) Book of abstracts: The International Conference on Advances in Materials and Processing Technologies (AMPT 2009). Kulliyyah of Engineering, International Islamic University Malaysia, Kuala Lumpur.

Omar Shuriye, Abdi and Ismail, Ahmad Faris and Dahalan@Ghazali, Azweeda, eds. (2009) Ethics of engineering education. IIUM Press, Kuala Lumpur. ISBN 9789833855674

Faris, Waleed Fekry and Ihsan, Sany Izan (2009) A first course in control systems. IIUM Press, Kuala Lumpur. ISBN 9789833855650

Faris, Waleed Fekry and Mohyuddin, Muhammad Raheel and Ismail, Ahmad Faris (2009) Fundamentals of fluid mechanics. IIUM Press, Kuala Lumpur. ISBN 9789833855889

Kadar Hamsa, Abdul Azeez and Wan Mohd Rani, Wan Nurul Mardiah (2009) Telecommuting and transportation: relationship and implications. IIUM Press, Kuala Lumpur. ISBN 9789675272073

Sidek, Shahrul Na'im and Sarkar, Nilanjan (2009) Dynamic modeling and control of nonholonomic wheeled mobile robot: when subjected to wheel slip. VDM Verlag, Verlag. ISBN 9783639139150

Book Chapter

Ahmed Kabashi, Nassereldeen and A. Galal, Fatima (2009) Religion, environmental ethics and global climate change. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 173-177. ISBN 9789833855674

Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2009) Improvement of machinability of hard to machine materials by cryogenic cooling and job preheating. In: Proceedings of the seminar on research findings 2008. IIUM Press, Kuala Lumpur, pp. 443-454. ISBN 9789833855780

Faris, Waleed Fekry (2009) Nonlinear modeling and analysis of mems-based diaphragm devices. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 360-371. ISBN 9789833855780

Hrairi, Meftah and Khalifa, Othman Omran (2009) An Integrated approach of ethics and professional issues into engeneering curriculum. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 275-281. ISBN 9789833855674

Ibrahimy, Muhammad Ibn and Reaz, Mamun Bin Ibne and Hussain, S. (2009) Hardware prototyping of an efficient encryption engine. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 421-430. ISBN 9789833855780

Ismail, Ahmad Faris and Shuriye, Abdi Omar and Adam, Ibrahim A. H. (2009) The concept of Itqan and its role in Muslim professional life. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 99-105. ISBN 9789833855674

Jamaludin, Roslan and Shihab, A. Hameed and Noordin, Mohamad Fauzan (2009) Ethical requirement in quality software engineering projects. In: Ethics of Engineering Education. IIUM Press, Kuala Lumpur, pp. 43-51. ISBN 9789833855674

Kabbashi, Nassereldeen Ahmed and Muyibi, Suleyman Aremu and Fofana, Omar (2009) Monitoring, assessing and recommending the quality potable water on UIA campus. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 373-382. ISBN 9789833855780

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2009) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 397-404. ISBN 9789833855780

Khan, Md. Raisuddin (2009) Optimal design and modelling of complaint micro-linkage mechanism. In: Proceedings of the Seminar on Research Findings. IIUM Press, Kuala Lumpur, pp. 405-420. ISBN 9789833855780

Legowo, Ari (2009) Robust flight control design for a turn coordination system with parameter uncertainties. In: Proceedings of the Seminar on Research Findings. IIUM Press, Kuala Lumpur, pp. 431-442. ISBN 9789833855780

Mel, Maizirwan and Ja'afar, Ja'afar Nuhu (2009) Vaccine manufacturing in Islamic perspective. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 147-151. ISBN 9789833855674

Mohammed Jama, Abdi Risaq and Khalifa, Othman Omran and Omar Shuriye, Abdi (2009) Privacy and technology: implications and challenges. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 253-259. ISBN 9789833855674

Mohd. Salleh, Hamzah and BenLahcene, Zohir (2009) A study on noise pollution on Islamic perspective. In: Ethics of Engineering Education. IIUM Press, Kuala Lumpur, pp. 29-42. ISBN 9789833855674

Mridha, Shahjahan (2009) Impact behaviors of epoxy/glass fiber composites at subzero and elevated temperatures. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 383-395. ISBN 9789833855780

Omar Shuriye, Abdi and Mel, Maizirwan (2009) Prophetic philosophy of pharmaceutics. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 59-66. ISBN 9789833855674

Shafie, Amir Akramin (2009) Designing a rubric to assess student engineering projects. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 301-308. ISBN 9789833855674

Tijani, Ismaila B. and Martono, Wahyudi (2009) Social and ethical implications of intelligent machines. In: Ethics of Engineering Education. IIUM Press, Kuala Lumpur, pp. 135-139. ISBN 9789833855674

Wan Mohd Saidin, Wan Zalina and Khalifa, Othman Omran (2009) Assistive technology for students with vision impairments. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 179-186. ISBN 9789833855674

Proceeding Paper

Adam, Ibrahim A. H. and Islam, Md. Rafiqul and Khalifa, Othman Omran and Alam, A. H. M. Zahirul (2009) Effects of linear array antenna parameters to the performance of LMS beamforming algorithms. In: Proceedings of the 7th International Conference on Robotics, Vision, Signal Processing & Power Applications (RoViSP 2009), December 19-20, Langkawi, Malaysia. (Unpublished)

Adnan, Nurhidayah and Yaacob, Yuzita and Hassan, Mohammad Khatim and Mohd. Salleh, Hamzah and Noorbatcha, Ibrahim Ali (2009) Developing CAS models in immunology teaching. In: International Conference on Electrical Engineering and Informatics, 2009 (ICEEI '09), 5 - 7 August, 2009, Selangor, Malaysia.

Ahmad, Salmiah and Tokhi, M. Osman and Hussain, Zakaria (2009) Rejection of yaw disturbance in a two-wheeled wheelchair system. In: Third Asia International Conference on Modelling & Simulation, AMS '09. , 25 - 29 May, 2009.

Ahmad, Zuraida and Yusof, Yusliza and T.S, Le and S, Kumaran (2009) Effects of nanoclays on the structure and properties of cotton/albumen composites. In: 2nd Annual International Conference on Green Technology and Engineering, April 2009, Faculty of Engineering Malahayati University, Lampung, Indonesia.

Ahmad Nor, Yusilawati and Mel, Maizirwan and Sopyan, Iis and Mohd. Salleh, Hamzah and Ng, K.H. and Wong, Chiow San (2009) Fabrication system for surface modification of polystyrene beads by UV/Ozone treatment and its characterization. In: Advances in Materials and Processing Technologies, 26th-29th October 2009, Kuala Lumpur. (Unpublished)

Ahmad Nor, Yusilawati and Nuhu Jaafar, Jaafar and Mel, Maizirwan (2009) Optimization of serum preparation in Vero cell culture using a statistical approach. In: 3rd International Conference on Chemical & Bioprocess Engineering , 12th–14th August 2009, Kota Kinabalu, Sabah. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) Flank wear modeling in high speed turning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) Machining time stimulating in high speed hard tuning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) The development of cost structuring of high speed hard turning. In: Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur. (Unpublished)

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul (2009) Reconfigurable patch antenna by RF MEMS switches. In: 6th International Symposium on Mechatronics and its Applications (ISMA '09), 24 - 26 March 2009, Sharjah, UAE.

Ali, Hasimah and Martono, Wahyudi and Salami, Momoh Jimoh Eyiomika (2009) Keystroke pressure based typing biometrics Authentication system by combining ANN and Anfis-based classifiers. In: 5th International Colloquium on Signal Processing & Its Applications (CSPA), 6-8 March 2009, Kuala Lumpur.

Ali, Maisarah and Musa, Mohd Faiz (2009) Environmental impacts of ecotourism on mangrove: case study of Kuala Selangor Nature Park. In: 6th Workshop on Sosial Capital and Development Trends in the Japanese and Swedish Countryside, 1-2nJuly 2009, Ishigaki Island, Japan.

Ali, Mohammad Yeakub and Omar, Mohd Aliff and Othman, Khairul Irman and Hung, Wayne N.P. (2009) Prediction of burr formation in fabricating MEMS components by micro end milling. In: International Conference on Materials for Advanced Technologies (ICMAT), 28 June - 03 July, Singapore.

Ali , Eman N and Muyibi, Suleyman Aremu and Salleh, Hamzah Mohd. and Salleh, Mohd Ramlan M. and Alam, Md. Zahangir (2009) Moringa oleifera seeds as natural coagulant for water treatment. In: Thirteenth International Egyptian Water Technology Conference 2009, March 12-15, 2009, Hurghudah, Egypt. (Unpublished)

Amid, Azura and Abu Samah, Norshahida and Yusof, Faridah (2009) Development of a rapid, simple and reliable method for identification of halal slaughtered chicken. In: ASIANALYSIS X & SKAM 22 & QSEL 4 & AYACS 2009 & Mini Symposium on Halal Products Analysis & Innovation, 11-13 Aug 2009, na.

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2009) A novel scheme for weld microstructure control using cryogenic cooling. In: The International Conference on the Advanced Materials and Processing Technologies, 26-29 October 2009, The Legend Hotel, Kuala Lumpur.

Azman, Amelia Wong and Bigdeli, Abbas and Biglari-Abhari, Morteza and Mohd Mustafah, Yasir and Lovell, Brian (2009) A BBN-based framework for adaptive IP-reuse. In: Proceedings of the 6th FPGAworld Conference, 9 Sept. 2009, Kista, Stockholm, Sweden.

Azman, Amelia Wong and Bigdeli, Abbas and Biglari-Abhari, Morteza and Mohd Mustafah, Yasir and Lovell, Brian (2009) Exploiting Bayesian belief network for adaptive IP-reuse decision. In: Digital Image Computing: Techniques and Applications 2009 (DICTA '09), 1 - 3 December 2009, Melbourne, VIC.

Azram, Mohammad and Daoud, Jamal Ibrahim and Elfaki, Faiz Ahmed Mohamed (2009) Arithmatic version of boolean algebra. In: International Conference on Education, Information Technology Applications (EITA), 8th-11th August 2009, Beijing, China.

Bhuiyan, Moinul (2009) Optimization of low normal force contact spring. In: Tyco Electronics Japan Technical Conference 2009, Oct 2009, Kawasaki, Japan. (Unpublished)

Bhuiyan, Moinul and Takemasa, Eiichiro (2009) A low normal force contact using photolithography and Ni-Co electro fine forming technology. In: TE-Japan Technical Conference, 14 May 2009, Kawasaki, Japan.

Billah, Md. Masum and Ahmed, Mohiuddin and Khan, Md. Raisuddin and Farhana, Soheli (2009) Hexagonal structure hexapod robot: developing a method for omni-directional navigation. In: Proceedings of International Conference on Asian Simulation and Modeling (ASIMMOD '09), 22 - 23 January 2009, Bangkok, Thailand.

Cetiner, Beytullah Gultekin and Ismail, Ahmad Faris and Hassan, Azmi (2009) Ontology of manufacturing enginneering. In: 5th International Advanced Technologies Symposium (IATS'09), 13 - 15 May, 2009, Karabuk, Turkey.

Cetiner, Beytullah Gultekin and Sari, Murat and Aburas, Hani M. (2009) Recognition of dengue disease patterns using artificial neural networks. In: 5th International Advanced Technologies Symposium (IATS'09), 13-15 May, 2009, Karabuk, Turkey.

Chou Yong, Tan and Singh, Ramesh and Khai Liang, Aw and Wei Hong, Yeo and Sopyan, Iis and Wan Dung, Teng (2009) Sintering behavior of hydroxyapatite ceramics prepared by different routes. In: 33rd International Conference & Exposition on Advanced Ceramics and Composites 2009, 18 - 23 January 2009, Daytona Beach, FL, United States.

Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris (2009) Solving linear system of partial differential equations by homotopy-pertubation method. In: 4th International Conference on Research and Education in Mathematics, 21-23 October 2009, Renaissance Hotel, Kuala Lumpur.

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali E. (2009) Accurate compact flowfield-dependent variation method for compressible Euler equations. In: International Conference on Applications and Design in Mechanical Engineering 2009 (iCADME 2009), 11 - 13 October 2009, Penang, Malaysia.

Faris, Waleed Fekry and El Hawari, Yaser and Ihsan, Sany Izan and Hassan Abdalla Hashim, Aisha (2009) Technology transfer: Challenges and prospective Arab world as a case study. In: International Engineering Education Conference (IEEC 2009), 16-18 May 2009, Madinah, Kingdom of Saudi Arabia.

H. H. , Hairuddin and S., Muddath and Anuar, Hazleen and N. A, Jamal (2009) Preliminary studies of rubber toughened polypropylene - kenaf fiber composite. In: 4th International Conference on Recent Advabces in Materials, Minerals & Environment and 2nd Asian Symposium on Material and Processing, 1st - 3rd June 2009, Penang, Malaysia.

Hasan, Muhammad Asfarul and Ibrahimy, Muhammad Ibn and Uddin, Md. Jasim and Hussain, Mohammed Sazzad and Reaz, Mamun Ibn (2009) VHDL Modelling of FECG Extraction from the Composite Abdominal ECG using Artificial Intelligence. In: 2009 IEEE International Conference on Industrial Technology (ICIT), 10 - 13 Feb, 2009, Perth, Australia.

Islam, Mazharul and Amin, M. Ruhul and Shariff, Yasir M. (2009) Computational Analysis of a High-Lift and Low Reynolds Number Airfoil at Turbulent Atmospheric Conditions. In: ASME 2009 International Mechanical Engineering Congress and Exposition, IMECE2009, 13 -19 November 2009, Lake Buena Vista, FL; United States.

Islam, Mazharul and Amin, Mohammad Ruhul and Carriveau, Rupp and Fartaj, Amir (2009) Investigation of low reynolds number airfoils for fixed-pitch straight-bladed VAWT. In: 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 5-8 January 2009, Orlando, Florida, U.S.A..

Iwata, Masashi and Jami, Mohammed Saedi (2009) Removal of colloidal particles from colloidal waste by use of particle immobilization in gel. In: Filtration & Separation Symposium and Exhibition in collaboration with INCHEM Tokyo 2009 (FSJA F/S Symposium), 19-21 November 2009, TIME24 Bld. Aomi, Tokyo, Japan.

Jami, Mohammed Saedi and Iwata, Masashi (2009) Analysis of combined operation of electro-osmetic dewatering and mechanical expression. In: Filtration & Separation Symposium and Exhibition in collaboration with INCHEM Tokyo 2009, 19-20th November 2009, TIME24 Bld. Aomi, Tokyo, Japan.

Jaswir, Irwandi and Nagao, Akihiko (2009) Improvement of solubilization and uptake of dietary antioxidants in human hepatocellular liver carcinoma (HepG2) cell line (PDNP4). In: International Palm Oil Congress (PIPOC 2009) , 9-12 November 2009, Kuala Lumpur Convention Centre (KLCC), KL, Malaysia.

Kafayat Oluwatoyin, Shobowale and Khan, Md. Raisuddin and Muhida, Riza (2009) Control of pallets in automatic storage and retrieval system. In: International Conference Electrical Energy and Industrial Electronic Systems (EEIES 2009), 7-8 December 2009, Penang, Malaysia. (Unpublished)

Khalifa, Othman Omran and AM. Assidiq, Abdulhakam and Hassan Abdalla Hashim, Aisha (2009) Vision-based lane detection for autonomous artificial intelligent vehicles. In: IEEE International Conference on Semantic Computing 2009 (ICSC '09), 14-16 September 2009 , Berkeley, CA, USA .

Khalifa, Othman Omran and Htike@Muhammad Yusof, Zaw Zaw and Khan, Imran Moez (2009) Fuzzy-Based Path Analysis. In: Post-ICONIP'09 Workshop on Advances in Intelligent Computing, Dec 7, 2009, Kuala Lumpur, Malaysia.

Kiran, Maleeha and Lai, Weng Kin and Kyaw Kyaw, Hitke Ali (2009) Clustering techniques for human posture recognition: K-Means, FCM and SOM. In: 9th WSEAS international conference on signal, speech and image processing, and 9th WSEAS international conference on Multimedia, internet & video technologies, 3 - 5 September, 2009, Budapest Tech, Hungary.

Md Zain, Badrul Aisham and Tokhi, M. Osman and Toha, Siti Fauziah (2009) PID-based control of a single-link flexible manipulator in vertical motion with genetic optimisation. In: Third UKSim European Symposium on Computer Modeling and Simulation 2009, 25-27 November 2009, Athens, Greece.

Mel, Maizirwan and Abdeen, Fouad and Sopyan, Iis (2009) Fabrication of ceramic membrane chromatography for biologics purification. In: Advanced materials and Processing Technologies, 26-29 October 2009, Kuala Lumpur.

Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Qudseih, Isam Y. (2009) Rapid method for the determination of moisture content in biodiesel produced from insects' oil using FTIR spectroscopy. In: International Palm Oil Congress (PIPOC 2009) , 9-12 November 2009, Kuala Lumpur Convention Centre (KLCC), KL, Malaysia.

Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Hussein, Ismail H. and Yassin, Atif A. A. and Che Man, Yakoob and M. Noor, Nur Ellyana (2009) The potential of date palm kernel oil. In: International Palm Oil Congress (PIPOC 2009) , 9-12 November 2009, Kuala Lumpur Convention Centre (KLCC), KL, Malaysia.

Mohamad, M. and Tokhi, M. O. and Toha, Siti Fauziah and Latiff, I. Abd. (2009) Particle swarm modelling of a flexible beam structure. In: Third UKSim European Symposium on Computer Modeling and Simulation 2009, 25-27 November 2009, Athens, Greece.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of copper and antimony on the mechanical properties of pewter alloys made by conventional and microwave powder sintering. In: 4th International Conference on Recent Advances in Materials, Minerals & Environment and 2nd Asian Symposium On Materials & Processing (RAMM & ASMP 2009), 1-3 June 2009, Penang, Malaysia.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of powder sintering method on the densification and microstructure of pewter alloys. In: Processing, Microstructure and Performance of Materials, 8–9 April 2009, Auckland, New Zealand.

Mohammad Abdel Rahman, Mohammad Ibraheem and Sang-Young, Park (2009) Integrated attitude determination and control system via magnetic measurements and actuation only. In: Proceedings of the 11th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS 2009), 30th May - 1st Jun 2009, Instanbul, Turkey.

Mohd Mustafah, Yasir and Bigdeli, Abbas and Azman, Amelia Wong and Lovell, Brian (2009) Face detection system design for real time high resolution smart camera. In: Third ACM/IEEE International Conference on Distributed Smart Cameras, 2009. ICDSC 2009, 30 Aug. - 2 Sept. 2009, Societ del Casino, Teatro Sociale di Como.

Naji, Ahmed Wathik and Gunawan, Teddy Surya and Hameed, Shihab A. and Zaidan, B.B. and Zaidan, A.A. (2009) "Stego-Analysis Chain, Session One" investigations on steganography weakness Vs stego-analysis system for multimedia file. In: 2009 International Association of Computer Science and Information Technology - Spring Conference, 17-20 April 2009, Singapore.

Noorbatcha, Ibrahim Ali and Abdul Hadi, Muaz and Ismail, Ahmad Faris and Hamzah, Mohd. Salleh (2009) In silico approach in designing Xylanase for biobleaching industry. In: 3rd International Conference on Chemical & Bioprocess Engineering , 12–14 August 2009, Kota Kinabalu, Sabah.

Noorbatcha, Ibrahim Ali and Samsudin, Nurhusna and Hamzah, Mohd. Salleh and Idid, Syed Zahir (2009) Predicting the anticancer activity of seconucleoside nitrosourea analogs. In: Kulliyyah of Engineering Research and Innovation Exhibition 2009, (KERIE 2009), 21-22 January 2009, Kuala Lumpur, Malaysia. (Unpublished)

Noorbatcha, Ibrahim Ali and Samsudin, Nurhusna and Hamzah, Mohd. Salleh and Syed Osman Idid, Syed Zahir Idid (2009) Computer aided design of efficient phytases. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2009), 21-22 January 2009, Gombak.

Olanrewaju, Rashidah Funke and Aburas, A. A. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2009) Image quality assessment of fast fourier transform domain watermarked images. In: International Conference on Rural Information and Communication Technology , 17-18 June 2009, Bandung, Indonesia..

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. (2009) Quality of service multicast routing protocol for large scale MANETs. In: International Conference on Computer Technology and Development (ICCTD 2009), 13-15 November, 2009, Kota Kinabalu, Malaysia.

Rahman, Md. Arafatur and Azad, Md. Saiful and Anwar, Farhat (2009) Intergating multiple metrics to improve the performance of a routing protocol over wireless mesh networks. In: International Conference on Signal Processing Systems (ICSPS 2009), 15-17 May 2009, Singapore.

Rahman, Md. Arafatur and Azad, Md. Saiful and Anwar, Farhat and Hassan Abdalla Hashim, Aisha (2009) A simulation based performance analysis of reactive routing protocols in Wireless Mesh Networks. In: 2009 International Conference on Future Networks, 7-9th March 2009 , Bangkok, Thailand .

Ramasamy, K. and Balamuralithara, B. and Siddiqi, Mohammad Umar (2009) Performance evaluation of proposed asymmetric turbo code in WCDMA HSDPA system. In: 5th IEEE GCC Conference and Exhibition 2009, 17-19 March 2009 , Kuwait City .

Seyyedoshohadaei, Seyyed Masoud and Khatun, Sabira and Mohd. Ali, Borhanuddin and Othman, Mohamed and Anwar, Farhat (2009) An integrated scheme to improve performance of fast mobile IPv6 handover in IEEE 802.16e network. In: IEEE 9th Malaysia International Conference on Communications (MICC 2009) , 14 -17 December 2009 , Kuala Lumpur Malaysia.

Shuriye, Abdi Omar (2009) Aslamah Manahij al-lughah alArabiyah fi as-sumal : furas wa 'aqabat. In: International Conference on : Islamiyyah Dirasat al-Lughawiyyah wa al-Adabiyyah wa Tatbiqatiha, 21-23 December 2009, IIUM-Kuala Lumpur. (Unpublished)

Sopyan, Iis (2009) Artificial bone as an alternative solution for halal bone implants. In: World Halal Research Summit 2009, 7 - 8 May, 2009, Kuala Lumpur. (Unpublished)

Sutjipto, Agus Geter Edy and Jufriadi, . and Muhida, Riza and Adesta, Erry Yulian Triblas (2009) Modeling electric field distribution on insulator under electron bombardment in vacuum. In: Proceedings of World Academy of Science, Engineering and Technology.

Toha, Siti Fauziah and Tokhi, M. O. (2009) Dynamic nonlinear inverse-model based control of a twin rotor system using adaptive neuro-fuzzy inference system. In: Third UKSim European Symposium on Computer Modeling and Simulation 2009, 25-27 November 2009, Athens, Greece.

Wan Nordin, Mimi Aminah and Abd El-Raouf, Hany E. and Alam, A. H. M. Zahirul (2009) Design of composite right/left-handed (CRLH) transmission line (TL) based leaky-wave array antenna. In: Proceedings of 2009 IEEE International Conference on Antennas, Propagation and Systems (INAS 2009), 3-5 December 2009, Johor Bahru, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Badri, Zu Hazmin and Masri, Zainal and Hussin, Zahir (2009) Benchmarking the rapid prototyping machines (RPM) for education purpose using quality function deployment (QFD). In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Zaidan , A. A. and Othman, Fazidah and Zaidan , B. B. and Raji, R. Z. and Hasan, Ahmed K. and Naji, Ahmed Wathik (2009) Securing cover-file without limitation of hidden data size using computation between cryptography and steganography. In: Proceedings of the World Congress on Engineering 2009, 1 - 3 July 2009, London, U. K.. (Unpublished)

Monograph

Al-Mamun, Abdullah (2009) Study on the river water quality trends and indexes in Peninsular Malaysia. Technical Report. Department of Irrigation and Drainage , Malaysia.