Items where Author is "Purwanto, Hadi"
 | Up a level |
Article
Khamis, Siti Salwa and Purwanto, Hadi and Mohd Salleh, Hamzah and Abd. Rahman, Mohamed and Rozhan, Alya Naili (2020) New approach of Municipal Solid Waste (MSW) leachate treatment using hydrothermal method. TEST Engineering & Management, 83. pp. 1117-1121. ISSN 0193-4120
Khamis, Siti Salwa and Purwanto, Hadi and Rozhan, Alya Naili and Abd. Rahman, Mohamed and Mohd. Salleh, Hamzah (2019) Characterization of municipal solid waste in Malaysia for energy recovery. IOP Conference Series: Earth and Environmental Science, 264 (1). pp. 1-6. ISSN 1755-1307 E-ISSN 1755-1315
Sirat, Mohd Shukri and Ismail, Edhuan and Purwanto, Hadi and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2017) Growth conditions of graphene grown in Chemical Vapour Deposition (CVD). Sains Malaysiana, 46 (7). pp. 1033-1038. ISSN 0126-6039
Musa, Mukhtarudin and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Othman, Raihan and Ani, Mohd Hanafi (2017) Microstructural and compositional study of metal laminated composite in Malay Keris. Advanced Science Letters, 23 (7). pp. 6237-6241. ISSN 1936-6612 E-ISSN 1936-7317
Othman, Nur Ezzah Faezah and Mohd. Salleh, Hamzah and Purwanto, Hadi (2016) Utilization of low-grade iron ore in ammonia decomposition. Procedia Chemistry, 19. pp. 119-124. ISSN 1876-6196
Rozhan, Alya Naili and Cahyono, Rochim Bakti and Nomura, Takahiro and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Akiyama, Tomohiro and Purwanto, Hadi (2016) Enhancement of oil palm empty fruit bunch char by impregnation of pyrolytic carbon from tar vapor decomposition. Journal of Renewable and Sustainable Energy, 8 (1). 013110-1-013110-11. ISSN 1941-7012
Othman, Nur Ezzah Faezah and Purwanto, Hadi and Mohd. Salleh, Hamzah (2015) Utilization of Malaysian low grade iron ore as medium for ammonia decomposition. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17286-17288. ISSN 1819-6608
Rozhan, Alya Naili and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Akiyama, Tomohir and Purwanto, Hadi (2015) Development of carbon-infiltrated bio-char from oil palm empty fruit bunch. ISIJ International, 55 (2). pp. 436-440. ISSN 1347-5460 (O), 0915-1559 (P)
Purwanto, Hadi and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Yunus, Nurul Azhani and Zamani Abd Rashid, Rusila and Tomohiro, Akiyama and Othman, Nur Ezzah Faezah (2014) Effect of reduction roasting by using bio-char derived from empty fruit bunch on the magnetic properties of Malaysian iron ore. International Journal of Mineral, Metallurgy and Minerals, 21 (4). pp. 326-330. ISSN 1674-4799
Purwanto, Hadi and Ani, Mohd Hanafi and Salleh, Hamzah Mohd. and Abd Rashid, Rushila Zamani and Yunus, Nurul Azhani and Tomohiro, Akiyama (2014) Enhancement of magnetic properties of Malaysian iron ore by reduction roasting using oil palm empty fruit bunch. ISIJ International, 54 (4). pp. 994-996. ISSN 1347-5460 (O), 0915-1559 (P)
Zamani Abd Rashid, Rusila and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Yunus, Nurul Azhani and Tomohiro, Akiyama and Purwanto, Hadi (2014) Reduction of low grade iron ore pellet using palm kernel shell. Renewable Energy, 63. pp. 617-623. ISSN 0960-1481
Yunus, Nurul Azhani and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Jusoh @ Abd Rashid, Rusila Zamani and Akiyama, Tomohiro and Purwanto, Hadi (2013) Reduction of iron ore/empty fruit bunch char briquette composite. ISIJ International, 53 (10). pp. 1749-1755. ISSN 1347-5460 (O), 0915-1559 (P)
Cahyono, Rochim B. and Rozhan, Alya Naili and Yasuda, Naoto and Nomura, Takahiro and Purwanto, Hadi and Akiyama, Tomohiro (2013) Carbon deposition using various solid fuels for ironmaking applications. Energy & Fuels, 27 (5). pp. 2687-2692. ISSN 0887-0624
Azman, Mohd Farizul and Yahya, Azmi and Purwanto, Hadi (2013) Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 46-49. ISSN 1793-8198
Zamani Abd Rashid, Rusila and Purwanto, Hadi and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Akiyama, Tomohiro and Yunus, Nurul Azhani (2013) Carbon doped iron ore using palm kernel shell. Advanced Materials Research, 701. pp. 28-31. ISSN 1022-6680
Yunus, Nurul Azhani and Ani, Mohd Hanafi and Purwanto, Hadi and Mohd. Salleh, Hamzah and Zamani Abd Rashid, Rusila and Akiyama, Tomohiro (2013) Magnetization of low grade iron ore using empty fruit bunch ash. Advanced Materials Research, 701. pp. 141-144. ISSN 1022-6680
Rozhan, Alya Naili and Cahyono, Rochim B. and Yasuda, Naoto and Nomura, Takahiro and Hosokai, Sou and Purwanto, Hadi and Akiyama, Tomohiro (2012) Carbon deposition from biotar by fast pyrolysis using the chemical vInfiltration process within porous low-grade iron ore for iron-making. Energy & Fuels, 26 (12). pp. 7340-7346. ISSN 0887-0624
Md Azizan, Farihan and Purwanto, Hadi and Mustafa, Mohd Yusry (2012) Effect of Sn addition on mechanical properties of zinc-based alloy. Advanced Materials Research, 576. pp. 378-381. ISSN 1022-6680
Purwanto, Hadi and Manshor, Hanisah (2012) Effect of holding time on the corrosion potential of SS304. Advanced Materials Research, 576. pp. 382-385. ISSN 1022-6680
Mohd Azizan, Farihan and Purwanto, Hadi and Mustafa, Mohd. Yusry (2012) Effect of adding Ag on tensile and microstructure properties of zinc alloy. International Journal of Engineering and Technology, 12 (3). pp. 78-84. ISSN 2077-1185
Yunus, Nurul Azhani and Ani, Mohd Hanafi and Purwanto, Hadi and Mohd. Salleh, Hamzah and Zamani Abd Rashid, Rusila and Akiyama, Tomohiro (2012) Reduction of briquette composite made of low grade from ore and biomass ash. SEAISI Quarterly Journal, 41 (4). pp. 12-16. ISSN 0129-5721
, Pramusanto and Purwanto, Hadi and Dahlan, Yuhelda and Saleh, Nuryadi (2011) Phase formation during reduction of iron sand with soda ash flux addition. Advanced Materials Research, 264-5. pp. 801-806. ISSN 1662-8985
Maruoka, Nobuhiro and Purwanto, Hadi and Akiyama, Tomohiro (2010) Exergy analysis of methane steam reformer utilizing steelmaking waste heat. ISIJ International, 50 (9). pp. 1311-1318. ISSN 1347-5460 (O), 0915-1559 (P)
Purwanto, Hadi and Selamat, Nurfazilah and ., Pramusanto and Akiyama, Tomohiro (2010) Pre-reduced iron produced from low grade ore using biomass. SEAISI Quarterly Journal, 39 (2). pp. 18-22. ISSN 0129-5721
Purwanto, Hadi and Kasai, Eiki and Akiyama, Tomohiro (2010) Process analysis of the effective utilization of molten slag heat by direct blast furnace cement production system. ISIJ International, 50 (9). pp. 1319-1325. ISSN 1347-5460 (O), 0915-1559 (P)
, Pramusanto and Saleh, Nuryadi and Purwanto, Hadi (2009) The effect of magnetization on the leached limonitic ore. Indonesian Mining Journal, 12 (2). pp. 90-95. ISSN 0854-9931
Hata, Yuichi and Purwanto, Hadi and Hosokai, Sou and Hayashi, Jun-ichiro and Kashiwaya, Yoshiaki and Akiyama, Tomohiro (2009) Biotar ironmaking using wooden biomass and nanoporous iron ore. Energy & Fuels, 23 (2). pp. 1128-1131. ISSN 0887-0624
Book
Purwanto, Hadi (2021) Advanced processing of Lateritic ore. BOOK PUBLISHER INTERNATIONAL, UK / India. ISBN 978-93-91473-07-5
Sutjipto, Agus Geter Edy and Purwanto, Hadi (2011) Introduction to probability safety assessment of nuclear power plant. IIUM Press, Kuala Lumpur. ISBN 9789674180546
Book Chapter
Purwanto, Hadi (2021) Phase change of low grade iron ore during sintering and reduction with oil palm empty fruit bunch. In: Advanced Aspects of Engineering Research. Book Publisher International, UK / India, pp. 23-33. ISBN 978-93-90768-14-1
Purwanto, Hadi and Jusoh @ Abd , Rusila Zamani (2011) Development of thermoselect process in waste management system in Malaysia. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 119-124. ISBN 9789674181659
Dahlan, Yuhelda and Purwanto, Hadi and Saleh, Nuryadi and , Pramusanto (2011) Effect of stabilizer addition on crystal formation of zirconia synthesized from zircon sand. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 20-26. ISBN 978-967-418-164-2
-, Pramusanto and Purwanto, Hadi and Saleh, Nuryadi and Suprianto, Sony (2011) Kinetic study of reduction roasting of mixed laterite ore and coal. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 70-74. ISBN 9789674181642
Ahmad, Zuraida and Purwanto, Hadi and Yusoff, Farrah (2011) Malaysian coir fibre for acoustical absorption cement composite panel. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 39-48. ISBN 9789674180218
Purwanto, Hadi and Mohd Selamat, Nor Fazilah (2011) Preparation of rice husk for raw material of silicon. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 203-206. ISBN 9789674181673
., Muta'alim and Purwanto, Hadi and Saleh, Nuryadi and ., Pramusanto (2011) Upgrading of iron sand by magnetic concentration and reduction. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 7-15. ISBN 9789674181642
Purwanto, Hadi and ., Muta'alim and Dahlan, Yuhelda and Saleh, Nuryadi and ., Pramusanto (2011) Upgrading of iron-rich laterite ore using reverse flotation. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 27-33. ISBN 9789674181642
Purwanto, Hadi and ., Pramusanto (2011) Upgrading of laterite ore by reduction and learning. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674181642
Proceeding Paper
Ismail, Ahmad Abdul Mun'im and Rosdin, Muhammad Rafiq Haikal and Rozhan, Alya Naili and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Md Din, Muhamad Faiz and Mohd Yasin, Mohd Fairus and Ani, Mohd. Hanafi (2023) Blast furnace slag cement clinker production using limestone-hot blast furnace slag mixture. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Rosdin, Muhammad Rafiq Haikal and Ismail, Ahmad Abdul Mun'im and Abdul Hamid, Abd. Malek and Purwanto, Hadi and Illias, Suhaimi and Syed Abu Bakar, Syed Noh and Ani, Mohd. Hanafi (2023) Effect of oxygen gas exposure on T91 alloy at high temperature oxidation of steam reformer. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Ani, Mohd Hanafi and Purwanto, Hadi and Musa, Mukhtaruddin and Illias, Suhaimi and Kaderi, Akbar and Salim, Nurjannah and Abd Rahim, Mohd Hasbi and Sutjipto, Agus Geter Edy (2022) Electrochemical monitoring of oxygen potential on Fe-Cr alloy surface during high temperature oxidation in dry and humid conditions. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17 November 2021, Virtual.
Rosdin, Muhammad Rafiq Haikal and Ismail, Ahmad Abdul Mun'im and Abdul Hamid, Abd. Malek and Purwanto, Hadi and Illias, Suhaimi and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2022) High temperature oxidation of T91 alloy of steam reformer. In: 7th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2021), 17th November 2021, Virtual, Online.
Ismail, Ahmad Abdul Mun'im and Rosdin, Muhammad Rafiq Haikal and Abdul Hamid, Abd. Malek and Purwanto, Hadi and Rozhan, Alya Naili and Ani, Mohd Hanafi (2022) Producing blast furnace slag cement clinker by utilizing redox reaction approach. In: 7th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2021), 17th November 2021, Virtual, Online.
Jefferi, Nurul Zafiqa and Amir, Adibah and Purwanto, Hadi (2022) Detection method of Kelulut honey adulteration. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.
Musa, Mukhtaruddin and Purwanto, Hadi and Abdul Razak, Rajabi and Othman, Raihan and Musa, Lukman and Ani, Mohd Hanafi (2020) Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..
Rozhan, Alya Naili and Hairin, Assayidatul Laila Nor and Mohd. Salleh, Hamzah and Purwanto, Hadi (2019) Mechanism of carbon deposition within char derived from oil palm empty fruit bunch. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.
Ramlan, Amir Hakimi and Sirat, Mohd Shukri and Ismail, Edhuan and Buys, Yose Fachmi and Purwanto, Hadi and Mohd Mustafah, Yasir and Md Din, Muhammad Faiz and Ani, Mohd Hanafi (2019) Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.
Ani, Mohd Hanafi and Zaharudin, M Z and ., Suryanto and Purwanto, Hadi and Din, M.F.M. and ., T. Kurniawan (2018) Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation. In: 2018 2nd International Conference on Engineering Innovation (ICEI), 5th-6th July 2018, Bangkok, Thailand.
Purwanto, Hadi and Rozhan, Alya Naili and Mohamad, A. S. and Zakiyuddin, Ahmad (2018) Characteristics of iron ore sinter with EFB addition. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1 -2 March 2018, Universiti Malaysia Pahang (UMP) Pekan Campus LibraryPekan, Pahang; Malaysia.
Purwanto, Hadi and Mohd. Salleh, Hamzah and Rozhan, Alya Naili and Mohamad, A.S. and Zakiyuddin, Ahmad (2018) Phase change of iron ore reduction process using EFB as reducing agent at 900-1200°C. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1-2 March 2018, Pekan, Pahang, Malaysia.
Purwanto, Hadi and Mohd. Salleh, Hamzah and Mohamad, Ainun Shaheera and Mohd Zakiyuddin, Amrina and Rozhan, Alya Naili (2018) Effect of EFB content on reducibility of low grade iron ore composite at 1000oC – 1200oC. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8- 9 August 2017, IIUM, Gombak, Kuala Lumpur.
Purwanto, Hadi and Mohd. Salleh, Hamzah and Mohamad, A. S. and Zakiyuddin, A. (2018) Effect of EFB content on reducibility of low grade iron ore composite at 1000°C - 1200°C. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
Purwanto, Hadi and Rozhan, Alya Naili and Zakiyuddin, Ahmad and Mohamad, A. S. (2018) Effect of temperature on porosity of iron ore sinter with biochar derived from EFB. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8-9 August 2017, Faculty of Engineering, International Islamic University Malaysia (IIUM) Kuala Lumpur.
Zulkefli, Farah Dzilhani and Rozhan, Alya Naili and Mohd. Salleh, Hamzah and Purwanto, Hadi (2016) Effect of pre-treatment on the quality of carbon-infiltrated bio-char. In: 4th International Conference Biotechnology Engineering 2016, 25-27 July 2016, Kuala Lumpur, Malaysia.
Rozhan, Alya Naili and Hamzah, Mohd. Salleh and Purwanto, Hadi (2016) Carbon deposition from biotar by fast pyrolysis of palm empty fruit bunch. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4th-6th August 2015, Penang, Malaysia.
Purwanto, Hadi and Othman, Nur Ezzah Faezah and Zaini, KH and Abdullah, Yusuf (2015) Effect of electron beam irradiation on the morphology of alumina ceramic. In: International Conference in Advances in Manufacturing And Materials Engineering , 23-25 september 2014, Kuala Lumpur.
Abdul Najib Khan, A. Shafiq Khan and Othman, Nur Ezzah Faezah and Purwanto, Hadi and Abdul halim, Hafasihah and Shamsul Baharin, Ahmad Firdaus (2015) Synthetic of pure alumina from aluminum scrap. In: International Conference in Advances in Manufacturing And Materials Engineering, 23-25 sep 2014, Kuala Lumpur.
Naili Rozan, Alya and Purwanto, Hadi (2015) Development process for tar filtering from biomass pyrolysis. In: 5th International Conference on Energy and Sustainability 2014 , 16-18 December 2014, Putrajaya, Malaysia.
Purwanto, Hadi (2014) Enhancement magnetic properties of Malaysian iron ore by biomass treatment. In: Workshop on Energy Conversion Materials 2014, 9th-11th Oct. 2014, Sapporo, Japan. (Unpublished)
Wan Mohd, Wan Roslina and Purwanto, Hadi (2011) Production of fine alumina from waste aluminum can. In: International Renewable Energy & Environment Conference (IREEC 2011), 24-26 June 2011, Kuala Lumpur. (Unpublished)
Mohamad Selamat, Norfazilah and Purwanto, Hadi and Fairos, Siti (2011) Treatment of iron ore using biomass waste for ironmaking. In: International Renewable Energy & Environment Conference (IREEC 2011), 24-26 June 2011, Kuala Lumpur. (Unpublished)
Md. Azizan, Farihan and Purwanto, Hadi and Adesta, Erry Yulian Triblas and Mustafa, Mohd. Yusry (2011) Effect of Ag addition on mechanical properties of zinc-based alloy. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), 6-8 June 2011, Putrajaya,Kuala Lumpur. (Unpublished)
Ahmad, Zuraida and Purwanto, Hadi and Sarifuddin, Norshahida and R. F. , Faezah and Y. , Farrah (2011) Acoustical and thermal properties of lightweight coir fiber reinforced cements composites. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)
Mustafa, Mohd. Yusry and Adesta, Erry Yulian Triblas and Purwanto, Hadi and Md. Azizan, Farihan (2011) Development of zinc based alloy for solderability. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), 6-8 June 2011, Putrajaya,Kuala Lumpur. (Unpublished)
Pham, Duc Trung and Shwe, S. and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and -, Farizahani (2011) Thermal properties of polymer materials in laser sintering process. In: Proceedings of the Institutional of Mechanical Engineers, Part B: Journal of Mechanical Engineering Science, 2011, united kingdom. (Unpublished)
Purwanto, Hadi and Wan Mohd, Wan Roslina and Hassin, Noor Farizahani (2011) Zero emission processing of waste aluminium foil. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.
Monograph
Purwanto, Hadi and Sutjipto, Agus Geter Edy (2012) Probability safety assessment for nuclear power plant. Research Report. s.n, Kuala Lumpur. (Unpublished)