Items where Author is "Patwari, Muhammed Anayet Ullah"

Article

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and S., Farahain (2011) Chip serration frequency-the primary cause of chatter during end milling operation. Advanced Materials Research, 264-26. pp. 1174-1179. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and A.K.M., Nurul Amin and Faris, Waleed Fekry (2011) Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V. Advanced Materials Research, 264/65. pp. 1160-1165. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2011) Influence of chip serration frequency on chatter formation during end milling of Ti6Al4V. Journal of Manufacturing Science and Engineering, 133 (1). 011013-1. ISSN 1087-1357

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Alam, Md. Shah (2011) Improvement of surface roughness in end milling of Ti6Al4V by coupling RSM with genetic algorithm. Advanced Materials Research, 264/65. pp. 1154-1159. ISSN 1022-6680

Amin, A. K. M. Nurul and Jaafar, Israd Hakim and Patwari, Muhammed Anayet Ullah and Zubaire, W.W.D. (2010) Role of discrete nature of chip formation and natural vibrations of system components in chatter formation during metal cutting. IIUM Engineering Journal, 11 (1). pp. 124-138. ISSN 1511-788X

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it's prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it’s prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

Alam, Md. Shah and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Konneh, Mohamed (2010) Prediction and investigation of surface response in high speed end milling of Ti-6Al-4V and optimization by genetic algorithm. Advanced Materials Research, 83-86. pp. 1009-1015. ISSN 1022-6680

Amin, A. K. M. Nurul and Jaafar, Israd Hakim and Patwari, Muhammed Anayet Ullah and Zubaire, W. W. D. (2010) Role of discrete nature of chip formation and natural vibration of system components in chatter formation during metal cutting. IIUM Engineering Journal, 11 (1). pp. 124-138. ISSN 1511-788X

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering, 40 (2). pp. 95-103. ISSN 0379-4318

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Artificial neural network chip serration frequency model in end milling of medium carbon steel. Research Journal of Applied Sciences, 4 (3). pp. 108-112. ISSN 1815-932X

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Characterisation of dynamic behaviour of vertical machining centre components: experimental and simulation approaches. International Journal of Engineering Systems Modelling and Simulation, 1 (4). pp. 231-241. ISSN 1755-9766

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S.K. (2009) Dynamic modal analysis of vertical machining centre components. Advances in Acoustics and Vibration, 2009 (508076). pp. 1-10. ISSN 1687-6261

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII, 1. pp. 89-96. ISSN 1584-2665

Hossain, Muhammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Karim, A. (2008) Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 320-326. ISSN 1734-8412

Hossain, Mohammad Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2008) Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness. International Journal of Materials Processing Technology. (In Press)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodological approach for the prediction of tangential cutting forces in end milling of stainless steel. Journal of Engineering, 6 (3). pp. 171-178. ISSN 1584-2673

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 1433-3015 (O); 0268-3768 (P) (In Press)

Book

Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Resonance effect in chatter formation in metal cutting. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-0447-3

Book Chapter

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end milling of Inconel 718 using coated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 123-131. ISBN 9789674181758

Hossain, Mohammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Artificial neural network algorithm for predicting the surface roughness in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM university press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 149-154. ISBN 9789674181758

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2011) Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 195-202. ISBN 9789674181758

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Hazim, A. and Adlan, Z. (2011) Comparison of machinability of ceramic insert in room temperature and cryogenic cooling conditions during end milling inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 209-215. ISBN 9789674181758

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Development of an artificial neural network algorithm for predicting the cutting force in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 143-148. ISBN 9789674181758

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2011) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 591-596. ISBN 9789670225685

Amin, A. K. M. Nurul and Hossain, Ishtiaq and Patwari, Muhammed Anayet Ullah (2011) Wear mechanism in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 239-245. ISBN 9789674181758

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) A coupled artificial neural network and RSM model for the prediction of chip serration frequency in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 117-122. ISBN 9789674181758

Proceeding Paper

Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and M., Dali and M.I., Musa (2010) Development of a cost effective technique to eliminate conventional finishing operation applying high speed end milling of silicon. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Sharulhazrin, M. S. and Hafizzudin , I (2010) A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010, 17-19 March, 2010, Hong Kong.

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Abdul Razak, Nurhayati (2010) A new technique to improve the machinability of hardened steel AISI H13 in end milling. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and Farahain, S (2009) Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration, 4-6 January 2009, Cairo, Egypt.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Computational analysis for the prediction chip serration frequency in end milling of steel AISI1020. In: Malaysian Metallurgical Conference, MMC 2008, 3 - 4 December 2008, UKM, Bangi, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Third International Conference on Mechatronics (ICOM) 2008, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference, 15 - 17 December 2008, Chennai, India.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ginta, Turnad Lenggo and Alam, S. and Lajis, M. A. (2008) Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008), 24 - 27 November 2008, Sarawak, Malaysia.

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2008) Preheated machining in end milling of hardened steel AISI D2. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Gold Coast, Australia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2008) Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008), 21-23 May, 2008, Johor Baru, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. and Ginta, Turnad Lenggo (2008) A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2007) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coated WC-co inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), , 7-9 November 2007, Fukuoka, Japan..