Items where Author is "Maleque, Md. Abdul "

Article

Efeoglu, Ihsan and Maleque, Md. Abdul and Gulten, Gokhan and Yesilyurt, Mustafa and Yaylali, Banu and Totik, Yasar and Kalam, Md Abul and Haji Hassan, Masjuki and Zulkifli, Nurin Wahidah (2024) Nb-doped hydrogenated diamond-like carbon coated biodiesel injectors material: Synthesis, structure and properties. Diamond and Related Materials, 149. pp. 1-10. ISSN 0925-9635

Md Idriss, Ahmed Nazrin and Maleque, Md. Abdul and Kamdi, Zakiah and Muhammad, Noorhafiza and Azhari, Azmir (2024) The preheating effect of mild steel layers deposited using SMAW at 100 A and 70 A. Journal of Advanced Research in Applied Mechanics, 119 (1). pp. 112-120. E-ISSN 2289-7895

Maleque, Md. Abdul and Md Idriss, Ahmed Nazrin and Naping, Rosmia and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 33-42. ISSN 2289 – 7895

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hj Hassan, Masjuki and Bello, Kamilu Adeyemi (2024) Contemporary progress in the hybrid coating of titanium alloys using the liquid additive manufacturing technique. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 108-117. ISSN 2289-7895

Paijan, Lailatul Harina and Maleque, Md. Abdul and Adeyemi, Bello Kamilu and Mamat, Mohd Fauzi and Hussein, Nur Izan Syahriah (2023) Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal Tribologi, 37. pp. 15-28. E-ISSN 2289-7232

Parveez, Bisma and Jamal, Nur Ayuni and Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Aabid, Abdul and Baig, Muneer (2023) Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25. pp. 25-37. ISSN 2238-7854

Paijan, Lailatul Harina and Maleque, Md. Abdul and Abu Bakar, Mohd Hadzley and Mamat, Mohd Fauzi and Osman, Mohd Hairizal and Rosli, Nor Ana and Asari, Mohd Rashidi (2023) Influence of microstructure on the hardness behavior of AISI duplex-2205 composite layer by TIG cladding. Malaysian Journal of Microscopy, 19 (1). pp. 118-128. ISSN 1823-7010 E-ISSN 2600-7444

Paijan, Lailatul Harina and Maleque, Md. Abdul (2023) Morphological and wear behavior of low temperature thermochemical gaseous nitriding process. Jurnal Tribologi, 36. pp. 57-69. E-ISSN 2289-7232

Odiwo, Hammed and Kamilu Adeyemi, Bello and Malik, Abdulwahab and Abdulmumin Adetayo, Adebisi and Umma, Abdullahi and Mamuda, Dodo Rayyan and Maleque, Md. Abdul and Muhammad Uhuotu, Suleiman (2023) Study on the optimization of surface modification processing of SiCp and tribological properties of AA6061-SiCp based composites. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 1-12. E-ISSN 0128-1852

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Maleque, Md. Abdul and Rozhan, Alya Naili and Aabid, Abdul and Baig, Muneer (2023) Optimizing the compressive properties of porous aluminum composites by varying diamond content, space holder size and content. Materials, 16 (3). pp. 1-19. ISSN 1996-1944

Paijan, Lailatul Harina and Maleque, Md. Abdul and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley (2022) Effects of temperature on the formation of nitride surface layer via thermochemical gaseous nitriding process. Malaysian Journal of Microscopy, 18 (2). pp. 122-131. E-ISSN 26007444

Maleque, Md. Abdul and Cetin, Safa Y. and Hassan, Masjuki and Sulaiman, Mohd Hafiz and Rosli, Adib Hamdani (2022) A systematic review on corrosive-wear of automotive components materials. Jurnal Tribologi, 35. pp. 33-49. E-ISSN 2289-7232

Bensenouci, Djamel and Merabet, Boualem and Ozkendir, Osman M. and Maleque, Md. Abdul (2022) Nanostructured AlGaAsSb materials for thermophotovoltaic solar cells applications. Nanomaterials, 12 (19). pp. 1-14. ISSN 2079-4991

Mahmood, M. H. and Maleque, Md. Abdul and Rahman, M.M. Hafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). pp. 6013-6023. ISSN 2193-567X E-ISSN 2191-4281

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Safiei, Wahaizad and Kadirgama, Kumaran and Maleque, Md. Abdul (2022) Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879

Maleque, Md. Abdul and B, Merabet and Ozkendir, Osman Murat and A. S., Hassanien (2021) Optical and structural characterization of (Mn, Fe) co-doped lead chalcogenides for optoelectronics applications. Journal of Optoelectronics and Advanced Materials, 23 (11-12). pp. 564-573. ISSN 1454-4164 E-ISSN 1841 - 7132

Parveez, Bisma and Maleque, Md. Abdul and Jamal, Nur Ayuni Jamal (2021) Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science, 56. pp. 16195-16222. ISSN 0022-2461 E-ISSN 1573-4803

Odiwo, H. and Bello, K. A and Abdulwahab, M and Adebisi, A. A. and Maleque, Md. Abdul (2021) Properties of aluminium/electroless ni-coated sic composites - a review. FUDMA Journal of Sciences, 5 (1). pp. 381-394. ISSN 2645-2944 E-ISSN 2616-1370

Maleque, Md. Abdul and Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and D., Ramasamy (2021) An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings, 41. pp. 30-37. E-ISSN 2214-7853

Maleque, Md. Abdul (2021) Spin-orbit coupling effect on the electronic structure of Sr2FeHfO6 alloy for spintronics device application. Journal of Magnetism and Magnetic Materials, 518. pp. 1-7. ISSN 0304-8853

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2021) Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, 46. pp. 6557-6566. ISSN 2193-567X E-ISSN 2191-4281

Urmi, Wajiha Tasnim and A.S, Shafiqah and Rahman, Md Mustafizur and Maleque, Md. Abdul and Kadirgama, Kumaran (2021) Preparation methods and challenges of hybrid nanofluids: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 56-66. E-ISSN 2289-7879

Fuhaid, Mutlag Shafi and Murali, R V and Maleque, Md. Abdul and Krishnan, P K and Abd. Rahman, Mohamed (2021) Synthesis and characterisation of aluminium composite with graphene oxide reinforcement. IOP Conference Series: Materials Science and Engineering, 1057. pp. 1-12.

Abd Malek, Zetty Akhtar and Rahman, Md Mustafizur and Kadirgama, Kumaran and Rahman, Saidur and Maleque, Md. Abdul (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped 10wt% graphene) - ethylene glycol based nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879

Mahmood, M.H. and Maleque, Md. Abdul (2020) Anodized nano-coating of copper material for thermal efficiency enhancement. Test Engineering and Management, 83 (May-June). pp. 1430-1437. E-ISSN 0193-4120

Mahmood, M. H. and Maleque, Md. Abdul and -, Suryanto (2020) Effect of Nano-CuO grain size on heat transfer performance of copper substrate. Test Engineering and Management, 83 (May-June). pp. 1180-1185. E-ISSN 0193-4120

Fuhaid, Mutlag Shafi and Krishnan, Pradeep Kumar and Maleque, Md. Abdul and Murali, R V and Ali, Mohammad Yeakub (2020) Manufacturing and friction welding of aluminium matrix composites – review of current status and future directions. TEST Engineering & Management, 83 (May-June). pp. 1122-1130. ISSN 0193-4120

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2020) Hardness behaviour of carbon nanotube-aluminium nano-composite using nanoindentation technique. Materials Today: Proceedings, xx (xx). pp. 1-5. E-ISSN 2214-7853 (In Press)

Abdullahi, Umma and Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub and Nirmal, Umar (2020) Friction coefficient of carbon nanotube reinforced aluminium nano-composite. Nigerian Journal of Engineering, 27 (1). pp. 25-35. ISSN 0794-4756 E-ISSN 2705-3954

Mamun, Abdullah Al and Muthalif, Asan G. A. and Ahmad, Zuraida and Ismail, Ahmad Faris and Ismail, Kamsiah and Maleque, Md. Abdul (2020) Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research, 8 (2). pp. 355-361. ISSN 2332-3205 E-ISSN 2332-3213

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2020) Effective parameter of nano-CuO coating on CO gas-sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering (AJSE), xx (xx). pp. 1-5. ISSN 2193-567X E-ISSN 2191-4281 (In Press)

Urmi, Wajiha Tasnim and Rahman, Md. Mustafizur and Wan Hamzah, Wan Azmi and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2020) Experimental investigation on the stability of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879

Maleque, Md. Abdul and Azwan, M. K. and Muhammad M., Muhammad M. (2020) Sliding wear of SiC reinforced duplex stainless steel via TIG torch sur-face melting technique. Recent Patents on Engineering, 14 (3). pp. 366-372. ISSN 1872-2121 E-ISSN 2212-4047

Maleque, Md. Abdul and Azwan, Muhammad and Afiq, Muhammad M. (2020) Sliding wear of SiC reinforced duplex stainless steel via TIG torch surface melting technique. Recent Patents on Engineering, 14 (3). pp. 366-372. ISSN 1872-2121 E-ISSN 2212-4047

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md. Mustafizur (2019) Optimisation of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754

Mamat, M. Azwan and Maleque, Md. Abdul and Rahman, Md Mustafizur (2019) TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 0020-2967 E-ISSN 1745-9192

Ahmad, Zuraida and Tajuddin, Maisarah and Maleque, Md. Abdul and Halim, Zahurin (2019) Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15. pp. 49-61.

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2019) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754 E-ISSN 1757-2762

Paijan, Lailatul Harina and Maleque, Md. Abdul (2018) Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi, 18. pp. 136-148. E-ISSN 2289-7232

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) Characterization of carbon nanotube reinforced aluminium nano-composite using field emission scanning electron microscope. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 73-77. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2018) Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3). pp. 32-39. E-ISSN 2227-524X

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2018) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation. ISSN 1757-2754 E-ISSN 1757-2762 (In Press)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Bello, Kamillo and ,, Mohd Azwan and Rahman, Md Mustafizur (2018) Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. Jurnal Tribologi, 17. pp. 15-28. E-ISSN 2289-7232

Adeleke, Sakiru Adekunle and Ramesh, Singh and Bushroa, Abdul Razak and Ching, Yern Chee and Sopyan, Iis and Maleque, Md. Abdul and Krishnasamy, Sivakumar and Chandran, Hari and Misran, Halina and Ubenthiran, Sutharsini (2018) The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International, 44 (2). pp. 1802-1811. ISSN 0272-8842

Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659 E-ISSN 2231-8380

Huzaifah, M. R.M. and Mohd Sapuan, Salit and Leman, Z. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul (2017) A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures, 13 (4). pp. 678-698. ISSN 1573-6105 E-ISSN 1573-6113

Yusof, N.S.B. and Sapuan, S.M. and Sultan, M.T.H. and Jawaid, M. and Maleque, Md. Abdul (2017) Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais, 29 (3 (September -December)). pp. 129-144. ISSN 0870-8312

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623

Md. Idriss, A. N and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Md Nasir, Ramdziah and Mridha, Shahjahan and Baker, T. N. (2017) Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology. ISSN 0267-0836 E-ISSN 1743-2847

Maleque, Md. Abdul and Adebisi, Adetayo Abdulmumin and Zainal, Nur Izzati (2017) Analysis of fracture mechanism for al-Mg/SiCp composite materials. IOP Conference Series: Materials Science and Engineering, 184. 012031-1. ISSN 1757-8981 E-ISSN 1757-899X

Sahid, N.S.M. and Rahman, Md. Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2017) Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering, 14 (1). pp. 3913-3926. ISSN 2229-8649 E-ISSN 2180-1606

Sahari, Japar and Sapuan, S.M. and Zainudin, E.S. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul and Zuhri, Mohd Y M and Akhtar, Riaz (2017) Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)). pp. 227-232. ISSN 1570-1794 E-ISSN 1875-6271

Sahari, Japar and Maleque, Md. Abdul (2016) Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites. e-Polymers, 16 (4). pp. 323-329. ISSN 1618-7229

Maleque, Md. Abdul and ., M. Radhi and Rahman, Md. Mustafizur (2016) Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1758-1764. ISSN 2289-4659 E-ISSN 2231-8380

ANR, Reddy and Saleh, A. A. and Islam, Md. Saiful and Hamdan, S. and Maleque, Md. Abdul (2016) Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels, 30 (1). pp. 334-343. ISSN 0887-0624 E-ISSN 1520-5029

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Bello, Kamil Adeyemi (2016) Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces, 23 (6). pp. 533-547. ISSN 0927-6440 E-ISSN 1568-5543

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ndaliman, Mohammed Baba (2016) Influence of stirring speed on microstructure and wear morphology of SiCp-6061Al composite. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 21-26. E-ISSN 0128-1852

Sahari, J. and Maleque, Md. Abdul (2016) Mechanical properties of oil palm shell composites. International Journal of Polymer Science, 2016. pp. 1-7. ISSN 1687-9422 E-ISSN 1687-9430

Md Idriss, A. N. and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Md Nasir, Ramdziah and Mridha, Shahjahan and Baker, T. N. (2016) Microstructural aspects of wear behaviour of TiC coated low alloy steel. Materials Science and Technology, 32 (4). pp. 303-307. ISSN 0267-0836 E-ISSN 1743-2847

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. and Dube, A. (2016) Preparation and characterisation of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. Transactions of the IMF : The International Journal of Surface Engineering and Coatings, 94 (4 (Special Issue: MITC special issue - Coatings for Tribology)). pp. 211-221. ISSN 0020-2967 E-ISSN 1745-9192

Mridha, Shahjahan and Md Idriss, Ahmed Nazrin and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Baker, T. Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836

Maleque, Md. Abdul and Belal, Ahmed Ghazal and Ali, Mohammad Yeakub and Al-razzouk, Maan Hayyan and Ahmed, Abu Saleh (2015) Corrosion of surface modified AISI 4340 steel in jatropha biodiesel. Advanced Materials Research, 1115. pp. 243-246. ISSN 1022-6680

Paruk, Perowansa Paruk and Siswanto, Waluyo Adi and Maleque, Md. Abdul and Mohd Shah, Mohd Kamal (2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force. Journal of Mechanical Science and Technology, 29 (5). pp. 1941-1953. ISSN 1976-3824 (O), 1738-494X (P)

Paruka , Perowansa and Mat Yasin, Md Hafizil and Mamat, Rizalman and Maleque, Md. Abdul and Md Shah, Md Kamal (2015) Crush zone morphology of epoxy–glass fiber–aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research, 1115. pp. 258-261. ISSN 1022-6680

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Mohammad Ismail, Mohammad Abul Fazal and Iqbal, M. M. and Paruka, Perowansa (2015) Effect of electron beam radiation on water absorption of hybrid kenaf-glass unsaturated polyester composite. Advanced Materials Research, 1115. pp. 266-269. ISSN 1022-6680

Shaufe, N. A. and Maleque, Md. Abdul and Saleh, Abu Ahmed and Paruka, Perowansa (2015) Effect of temperature on the wear properties of alloy steel under jatropha curcas biodiesel. Advanced Materials Research, 1115. pp. 203-206. ISSN 1022-6680

Arifutzzaman, Akhama and Yaacob, Iskandar Idris and Hawlader, Mohammad Nurul Alam and Maleque, Md. Abdul (2015) Fabrication and characterization of graphene from solid carbon dioxide. Advanced Materials Research, 1115. pp. 418-421. ISSN 1662-8985

Maleque, M. H. A. Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul (2015) Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research, 1115. pp. 207-2012. ISSN 1022-6680

Sabur, Abdus and Syed Mohammed, Mehdi and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Moudood, M. A. (2015) Investigation of surface roughness in micro-EDM of nonconductive ZrO2 ceramic with powder mixed dielectric fluid. Advanced Materials Research, 1115. pp. 16-19. ISSN 1022-6680

Sahari, J. and Maleque, Md. Abdul (2015) Modelling of mechanical properties of eco-friendly composites derived from sugar palm tree. Advances in Environmental Biology, 9 (19). pp. 176-181. ISSN 1995-0756

Maleque, Md. Abdul and Abdullahi, U. and Ali , Mohammad Yeakub (2015) Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research, 1115. pp. 398-401. ISSN 1022-6680

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach. Advanced Materials Research, 1115. pp. 238-242. ISSN 1022-6680

Paruka, Perowansa and Mat Yasin, Md Hafizil and Mamat, Rizalman and Maleque, Md. Abdul and Md Shah, Md Kamal (2015) Performance properties of hybrid aluminium–composite columnar tube under axial crush force. Advanced Materials Research, 1115. pp. 288-291. ISSN 1022-6680

Adeleke, S.A. and Maleque, Md. Abdul (2015) Surface features of TIG melting coated CP-titanium. Advanced Materials Research, 1115. pp. 234-237. ISSN 1022-6680

Maleque, Md. Abdul (2015) Synthesis and characterization of Ni–P coated hexagonal boron nitride by electroless nickel deposition. Surface Engineering and Applied Electrochemistry, 51 (6). pp. 523-529. ISSN 1068-3755

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research, 1115. pp. 166-169. ISSN 1022-6680

Adeleke, S. A. and Maleque, Md. Abdul (2015) TIG melted surface modified titanium alloy for cylinder liner application. International Journal of Automotive Engineering and Technologies, 4 (3). pp. 130-138. ISSN 2146-9067

Abdulmumin, Adebisi Adetayo and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2015) Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research, 1115. pp. 174-177. ISSN 1022-6680

Sahari, Japar and Sapuan, Mohd Salit and Zainudin, Edi Syams and Maleque, Md. Abdul (2014) Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences, 11 (1). pp. 1836-1840. ISSN 1546-9239 E-ISSN 1554-3641

Sahari, J. and Sapuan, S. M. and Zainudin, E. S. and Maleque, Md. Abdul (2014) Degradation characteristics of SPF/SPS biocomposites. Fibres & Textiles in Eastern Europe, 22 (5(107)). pp. 94-96. ISSN 1995-2014

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Jawaid, Mohammad and Iqbal, Mohammad (2014) Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Composites: Part B: Engineering, 56. pp. 68-73. ISSN 1359-8368

Maleque, Md. Abdul and Sabur, Abdus and Moudood, Abdul and Ali, Mohammad Yeakub (2014) Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials, 465. pp. 1329-1333. ISSN 1660-9336

Maleque, Md. Abdul and Arifutzzaman, Abul (2014) Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite. Materials Science Forum, 773-77. pp. 541-546. ISSN 1662-9752

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Moudood, Abdul (2014) Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive and Mechanical Engineering (IJAME), 10 (1). pp. 1841-1851. ISSN 1985-9385 (P) 2180-1606(O)

Maleque, Md. Abdul (2014) Performance assessment of aluminium composite material for automotive brake rotor. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 207-217. ISSN 1745-6444 (O), 1745-6436 (P)

Sahari, J. and Sapuan, S.M. and Zainudin, E.S. and Maleque, Md. Abdul (2014) Physico-chemical and thermal properties of starch derived from sugar palm tree (arenga pinnata). Asian Journal of Chemistry, 26 (4). pp. 955-959. ISSN 0970-7077 (P) 0975-427X (O)

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2014) Tribocorrosion behaviour of biodiesel. Tribology Online, 9 (1). pp. 10-20. ISSN 1881-2198

Adeleke, S.A. and Maleque, Md. Abdul (2014) Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures. Advanced Materials Research, 1024. pp. 207-210. ISSN 1022-6680

Maleque, Md. Abdul and A., Atiqah (2013) Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials. The Arabian journal for science and engineering , 38 (11). pp. 3191-3199. ISSN 1319-8025

Sahari, J. and Sapuan, S. M. and Maleque, Md. Abdul and Zainudin, E.S. (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design, 49. pp. 285-289. ISSN 0261-3069

Abdullah, Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2013) Characterization of carbon nanotube aluminium nano composite- effect of ball milling time on particle size. International Journal of Academic Research. Part A. Applied and Natural Sciences, 5 (2). pp. 91-93.

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Thermo-mechanical behaviours of thermoplastic starch derived from sugar palm tree (Arenga Pinnata). Carbohydrate Polymers, 92 (2). pp. 1711-1716. ISSN 0144-8617 (O)

Abdullah, Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2013) Effect of ball milling parameters on the synthesization of carbon nanotube aluminium nano composite. Advanced Materials Research, 626. pp. 537-541. ISSN 1022-6680

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research, 701. pp. 225-228. ISSN 1022-6680

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Khan, Ahsan Ali (2013) Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic. Procedia Engineering, 56. pp. 696-701. ISSN 1877-7058

Sabur, Abdus and A., Moudood and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering, 53 (2013). pp. 1-5. ISSN 1757-8981

Maleque, Md. Abdul and Abdullahi, U. (2013) Materials and processing route for aircraft brake system. International Journal of Mechanical and Materials Engineering (IJMME), 8 (1). pp. 14-20. ISSN 1823-0334

Maleque, Md. Abdul and Bello, K. A and Md Idriss, Ahmed Nazrin and Mirdha, S. (2013) Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials, 378. pp. 259-264. ISSN 1660-9336

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Iqbal, Mohammed (2013) Synergistic effect on flexural properties of kenaf-glass hybrid composite. Advanced Materials Research, 626. pp. 989-992. ISSN 1022-6680

Abdullahi, U. and Maleque, Md. Abdul and Nirmal, U. (2013) Wear mechanisms map of CNT-Al nano-composite. Procedia Engineering, 68. pp. 736-742. ISSN 1877-7058

Maleque, Md. Abdul and Sugrib , S. (2013) The tribological behaviour of Fe-C-Al cast iron – effect of temperature. Industrial Lubrication and Tribology, 65 (5). pp. 320-327. ISSN 0036-8792

Mohamed Ariff, Tasnim Firdaus and Sabiyah, Mohamad Yazid and Adam, Mohd Amirul and Nor, Mohd Anuar (2012) Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 576. pp. 675-678. ISSN 1022-6680

Maleque, Md. Abdul (2012) Aluminium-copper-SiCp composite materials corrosion in biodiesel. Advanced Materials Research, 576. pp. 425-428. ISSN 1022-6680

Debnath, Sujan and Chee, Won Yeo and Rahman, Muhammad Ekhlasur and Reddy, Moola Mohan and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2012) Aluminum-silicon carbide composites for enhanced physio- mechanical properties. Advanced Materials Research, 576. pp. 370-373. ISSN 1022-6680

A., Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2012) Carbon nano tube reinforced aluminium matrix nano-composite: a critical review. Australian Journal of Basic and Applied Sciences, 6 (12). pp. 69-75. ISSN 1991-8178

Maleque, Md. Abdul and Arifutzzaman, A. (2012) Digital logic and knowledge-based system for the automotive piston material selection. International Journal Materials and Structural Integrity, 6 (2/3/4). pp. 134-150. ISSN 1745-0055

Mridha, Shahjahan and Idriss, A.N. Md and Maleque, Md. Abdul and Suryanto, - and Mohamad, Souad A. (2012) Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding ARC. International Journal of Mechanical and Materials Engineering (IJMME), 7 (1). pp. 48-53. ISSN 2198-2791

Mridha, Shahjahan and Idriss, A.N.M. and Maleque, Md. Abdul and -, Suryanto and A. Mohamad Al-Batt’hi, Souad (2012) Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc. International Journal of Mechanical and Materials Engineering (IJMME), 7 (1). pp. 48-53. ISSN 1823-0334

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) Effect of water absorption on mechanical properties of sugar palm fibre reinforced sugar palm starch (spf/sps) biocomposites. Journal of Biobased Materials and Bioenergy, 6 (6). pp. 1-5. ISSN 1556-6560

Maleque, Md. Abdul and Adebisi, Adetayo A. and Shah, Qasim Hussain (2012) Energy and cost analysis of weight reduction using composite brake rotor. International Journal of Vehicle Structures & Systems, 4 (2). pp. 69-73. ISSN 0975-3540 (O), 0975-3060 (P)

Maleque, Md. Abdul and Afdzaluddin, Atiqah and M., Iqbal (2012) Flexural and impact properties of kenaf-glass hybrid composite. Advanced Materials Research, 576. pp. 471-474. ISSN 1022-6680

Rahman, Md. Mustafizur and Hamada, Khalaf I and Abu Bakar, Rosli and Maleque, Md. Abdul (2012) Heat transfer analysis inside exhaust port for a hydrogen fueled port injection engine. Advanced Science Letters, 14 (1). 239-243(5). ISSN 1936-6612

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Ria Jaafar, Talib and Halim, Zahurin (2012) New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering (IJMME), 7 (2). pp. 166-170. ISSN 1823-0334

Debnath, Sujan and Oo, Zeya and Rahman, Muhammad Ekhlasur and Maleque, Md. Abdul and Tan, Chong Keng (2012) Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences, 6. pp. 288-291. ISSN 1819-6608

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) Sugar palm tree: a versatile plant and novel source for biofibres, biomatrices, and biocomposites. Polymers from Renewable Resources, 3 (2). pp. 61-77.

Reddy, M. Mohan and Gorin, Alexander and Abou-El-Hossein, Khaled and Debnath, Sujan and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2012) Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts. Advanced Materials Research, 576. pp. 76-79. ISSN 1022-6680

Arifutzzaman, A. and Maleque, Md. Abdul and Debnath, Sujan (2012) The crystallinity and hardness properties of Al-Cu/SiCp new composite materials. Advanced Materials Research, 576. pp. 450-453. ISSN 1022-6680

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) A new approach to use Arenga pinnata as sustainable biopolymer: effects of plasticizers on physical properties. Procedia Chemistry, 4. pp. 254-259. ISSN 1876-6196

Adebisi, Adetayo A. and Maleque, Md. Abdul and Rahman, M. M. (2011) Metal matrix composite brake rotor: Historical development and product life cycle analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4. pp. 471-480. ISSN 1985-9385 (P) 2180-1606(O)

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. International Journal of Mechanical and Materials Engineering (IJMME), 6 (3). pp. 356-361. ISSN 1823-0334

Adebisi, Adetayo A. and Maleque, Md. Abdul (2011) Modelling aspect of corrosive wear under biodiesel. Engineering e-Transaction, 6 (2). pp. 161-168. ISSN 1823-6379

Rahman Khan, Md. Ashikur and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of Ti-6Al-4V in electrical discharge machining: A regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

Khan, Md. Ashikur Rahman and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

Maleque, Md. Abdul and Karim, Md. Rezaul and Yassin, N. (2011) Aluminium metal matrix composite: improving wear performance through treatment. Advanced Materials Research, 264-65. pp. 278-283. ISSN 1022-6680

Rahman Khan, Md. Ashikur and Rahman, Md. Mustafizur and Mat Noor, Muhamad and Maleque, Md. Abdul (2011) Current research trends on dry, near-dry and powder mixed electrical discharge machining. Advanced Materials Research, 264. pp. 956-961. ISSN 1022-6680

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Reverse engineering of motorcycle chain. Advanced Materials Research, 264-26. pp. 1678-1683. ISSN 1022-6680

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Conceptual design of aluminium metal matrix composite brake rotor system. Advanced Materials Research, 264. pp. 1648-1653. ISSN 1022-6680

Rahman, Md. Mustafizur and Mat Noor, Muhamad and Kadirgama, K. and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Modeling, analysis and fatigue life prediction of lower suspension arm. Advanced Materials Research, 264. pp. 1557-1562. ISSN 1022-6680

Mat Noor, Muhamad and Kadirgama, K. and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research, 264-. pp. 949-955. ISSN 1022-6680

Mat Noor, Muhamad and A/L Kadirgama, Kumaran and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Prediction of recycle method using relevance vector machine. Advanced Materials Research , 264. pp. 943-948. ISSN 1022-6680

Maleque, Md. Abdul and Hossain, M. Sayeed and Dyuti, S. (2011) Material properties and design aspects of folding bicycle frame. Advanced Materials Research, 264-. pp. 777-782. ISSN 1022-6680

Khan, Md. Ashikur Rahman and Rahman, Mohammad Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology, 74. pp. 198-202. ISSN 1307-6884

Khan, Md. Ashikur Rahman and Maleque, Md. Abdul and Rahman, M.M. Hafizur and Kadirgama, K. and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (2). pp. 503-507. ISSN 2010-376X E-ISSN 2010-3778

Sabur, Abdus and Moudood, M. A. and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2011) Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials, 465-66. pp. 1329-1333. ISSN 1660-9336

Shah, Sugrib Kumer and Haque, Md. Mohafizul and Maleque, Md. Abdul (2010) Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 208-213. ISSN 1823-0334

Rahman, Md. Mustafizur and Hamada, Khalaf I and Noor, M.M and Bakar, Rosli A. and Kadirgama, K. and Maleque, Md. Abdul (2010) In-cylinder heat transfer characteristics of hydrogen fueled engine: a steady state approach. American Journal of Environmental Sciences, 6 (2). pp. 124-129. ISSN 1553-345X

Shaha, Sugrib Kumar and Dyuti, S. and Haque, Md. Mokammel and Maleque, Md. Abdul (2010) Development of a new route for Fe-C-Al cast iron production. Journal of Applied Sciences, 10 (12). pp. 1196-1199. ISSN 1812-5662 (O), 1812-5654 (P)

Maleque, Md. Abdul and Sarker, Dyuti (2010) Materials selection of a bicycle frame using cost per unit property and digital logic methods. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 95-100. ISSN 1823-0334

Rahman, MM and Hamada, Khalaf I and Noor, M.M and Maleque, Md. Abdul and A. Bakar, Rosli and Kadirgama, K. (2010) Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10). pp. 1364-1371. ISSN 1546-9239

Rahman, Md. Mustafizur and Hamada, Khalaf I. and Mat Noor, Muhamad and Abu Bakar, Rosli and Kadirgama, Kumaran and Maleque, Md. Abdul (2010) Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10). pp. 1364-1371. ISSN 1546-9239 E-ISSN 1554-3641

Rahman, Md. Mustafizur and Mohd. Ihsan, Ahmad Kamal Ariffin and Abdullah, Shahrir and Mat Noor, Muhamad and Abu Bakar, Rosli and Maleque, Md. Abdul (2009) Assessment on surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp. 715-725. ISSN 1554-3641(O), 1546-9239 (P)

Maleque, Md. Abdul and Karim, Md. Rezaul (2009) Wear behavior of as-cast and heat treated triple particle size SiC reinforced aluminium metal matrix composites. Industrial Lubrication and Tribology, 61 (2). pp. 78-83. ISSN 0036-8792

Rahman , M.M. and Hamada, Khalaf I and Noor, M.M. and Bakar, Rosli A. and Kadirgama, K. and Maleque, Md. Abdul (2008) Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach. Journal of Applied Sciences, 8 (19). pp. 3316-3327. ISSN 1812-5662 (O), 1812-5654 (P)

Leman, Z. and Sapuan, S. M. and Saifol, A.M. and Maleque, Md. Abdul and Ahmad, M.M.H.M. (2008) Moisture absorption behaviour of sugar palm fiber reinforced epoxy composites. Materials and Design, 29. pp. 1666-1670. ISSN 0261-3069

Maleque, Md. Abdul and Karim, Md Rezaul (2008) Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study. Industrial Lubrication and Tribology, 60 (4). pp. 189-194. ISSN 0036-8792

Leman, Zulkiflle and Sapuan, Salit Mohd and Azwan, M. and Ahmad, Megat Mohamad Hamdan Megat and Maleque, Md. Abdul (2008) The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering, 47 (6). pp. 606-612. ISSN 0360-2559

Wan Nik, W.B. and Maleque, Md. Abdul and Ani, F. N. and Masjuki, H.H. (2007) Experimental investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59 (5). pp. 200-208. ISSN 0036-8792

Maleque, Md. Abdul and Belal, F. Y. and Sapuan, S. M. (2007) Mechanical properties study of pseudo-stem banana fiber reinforced epoxy composite. The Arabian journal for science and engineering , 32 (2B). pp. 359-364. ISSN 1319-8025

Suddin, Mohd Nizam and Salit, Mohd Sapuan and Ismail, Napsiah and Maleque, Md. Abdul and Zainuddin, Syams (2005) Total design of polymer composite automotive bumper fascia. Suranaree Journal of Science and Technology , 12 (12). pp. 39-45.

Leman, Z. and Sastra, H. Y. and Sapuan, S. M. and Hamdan, M. M. and Maleque, Md. Abdul (2005) Study on impact properties of arenga pinnata fibre reinforced epoxy composites. Jurnal Teknologi Terpakai, 3 (1). pp. 14-19. ISSN 1693-2536

Sapuan, S. M. and Maleque, Md. Abdul (2005) Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand. Materials and Design, 26 (1). pp. 65-71. ISSN 0261-3069

Sapuan, S. M. and Maleque, Md. Abdul and Hameedullah, M. and Suddin, M.N. and Ismail , N. (2005) A note on the conceptual design of polymeric composite automotive bumper system. Journal of Materials Processing Technology, 159. pp. 145-151. ISSN 0924-0136

Maleque, Md. Abdul and Poon, Y. M. and Masjuki, H. H. (2004) The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel. Journal of Materials Processing Technology, 153-15 (10). pp. 482-487. ISSN 0924-0136

Sapuan, S.M. and Harimi, M. and Maleque, Md. Abdul (2003) Mechanical properties of epoxy/coconut shell filler particle composites. Arabian Journal for Science and Engineering, 28 (2B). pp. 171-181. ISSN 1319-8025

Maleque, Md. Abdul and Masjuki, H. H. and Sapuan, Salit Mohd (2003) Vegetable-based biodegradable lubricating oil additives. Industrial Lubrication and Tribology, 55 (3). pp. 137-143. ISSN 0036-8792

Maleque, Md. Abdul and Masjuki, H.H. (2002) Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant. Industrial Lubrication and Tribology, 54 (4). pp. 177-182. ISSN 0036-8792

Onsa, M.H. and Sapuan, Salit Mohd and Basri, S. B. and Megat Ahmad, Megat Mohamad Hamdan and Maleque, Md. Abdul (2001) Elastohydrodynamic lubrication study of hard rolling contact using boundary element method. Industrial Lubrication and Tribology, 53 (4). pp. 148-154. ISSN 0036-8792

Masjuki, H.H. and Kalam, Md Abul and Maleque, Md. Abdul and Kubo, Aizoh and Nonaka, Tetsuya (2001) Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. Journal of Automobile Engineering, 215 (3). pp. 393-404. ISSN 0954-4070

Masjuki , H.H. and Saidur , Rahman and Choudhury, Imtiaz Ahmed and Mahlia, Teuku Meurah Indra and Ghani, A.K. and Maleque, Md. Abdul (2001) The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia. Energy, 26 (7). pp. 723-737. ISSN 0360-5442

Maleque, Md. Abdul (2000) Effect of mechanical factors on tribological properties of palm oil methyl blended lubricant. Wear, 239. pp. 117-125. ISSN 0043-1648

Masjuki, H. H. and Maleque, Md. Abdul and Kubo, Aizoh and Nonaka, Tetsuya (1999) Palm oil and mineral oil based lubricants - their tribological and emission performance. Tribology International, 32 (6). pp. 305-314. ISSN 0301-679X

Maleque, Md. Abdul and Masjuki, H.H. and Ishak, M. (1998) Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel. Tribology Transaction, 41 (1). pp. 155-159. ISSN 1040-2004

Haque, Mohafizul Md and Maleque, Md. Abdul (1998) Effect of process variables on structure and properties of aluminium–silicon piston alloy. Journal of Materials Processing Technology, 77 (1-3). pp. 122-128. ISSN 0924-0136

Maleque, Md. Abdul and Masjuki, H.H. (1997) Investigation of the anti-wear characteristics of palm oil methyl ester using a four-ball tribometer test. Wear, 206 (1-2). pp. 179-186. ISSN 0043-1648

Masjuki, H.H. and Maleque, Md. Abdul (1996) Wear, performance and emissions of a two-stroke engine running on palm oil methyl ester blended lubricant. Journal of Engineering Tribology, 210 (4). pp. 213-219. ISSN 1350-6501

Masjuki, H.H. and Maleque, Md. Abdul (1996) The effect of palm oil diesel fuel contaminated lubricant on sliding wear of cast irons against mild steel. Wear, 198 (1-2). pp. 293-299. ISSN 0043-1648

Book

Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Sarifuddin, Norshahida and Syed Shaharuddin, Sharifah Imihezri and Mohd Ali, Afifah and Abdul Halim, Nor Farah Huda, eds. (2023) Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore. ISBN 978-981-19-9508-8

Ahmad Azhar, Ahmad Zahirani and Ahmad, Zainal Arifin and Maleque, Md. Abdul and Anuar, Hazleen and Rejab, Nik Akmar and Sarifuddin, Norshahida and Ab Rahman, Mohd Fariz and Ahmadipour, Mohsen, eds. (2018) International Journal of Current Research in Science & Technology. UR Publishers, Telangana, India. ISBN 2581-4311 (ISSN)

Maleque, Md. Abdul and Salit, Mohd. Sapuan (2013) Materials selection and design. Springer Briefs in Materials . Springer, Singapore. ISBN 97898-4560-37-5 (In Press)

Rahman, Mustafizur and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Karim, A. N. Mustafizul and Maleque, Md. Abdul and Anuar, Hazleen and Ariff, Tasnim Firdaus and Iqbal, Mohammad and Samat, Noorasikin and Hassan, Noor Azlina, eds. (2012) Advances in manufacturing and materials engineering. Advanced Materials Research, 576 . Trans Tech Publications Ltd., , Switzerland. ISBN 978-3-03785-498-3

Yaacob, Iskandar Idris and Maleque, Md. Abdul and Halim, Zahurin, eds. (2011) Advances in composite materials. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674182311

Halim, Zahurin and Yaacob, Iskandar Idris and Maleque, Md. Abdul, eds. (2011) Advances in materials engineering Vol. 1. IIUM Press, Kuala Lumpur. ISBN 9789674181673

Maleque, Md. Abdul and Yaacob, Iskandar Idris and Halim, Zahurin, eds. (2011) Advances in materials engineering Vol. 2. IIUM Press, Kuala Lumpur. ISBN 9789674181680

Maleque, Md. Abdul and Yaacob, Iskandar Idris and Halim, Zahurin, eds. (2011) Contemporary metallic materials. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181642

Adesta, Erry Yulian Triblas and Iskandar, Idris and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Tasnim, Firdaus, eds. (2010) Materials Processing and Precision Engineering: series 1. Series 1 . Department of manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia.

Book Chapter

Masjuki, H.H. and Gulzar, M. and Kalam, M. A. and M. Zulkifli, N. W. and Maleque, Md. Abdul (2023) Engine tribology enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings - Technologies and Applications. CRC Press, Tailor & Francies Group LLC, pp. 221-254. ISBN 9781032038575

Haji Hassan, Masjuki and M., Gulzar and M. A., Kalam and N. W. M., Zulkifli and Maleque, Md. Abdul and M. S. S., Malik and A., Arslan (2023) Engine tribology: enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings: Technologies and Applications. CRC Press, Boca Raton, pp. 221-254.

Afdzaluddin, Atiqah and Ismail, N and K, K. Lim and Jalar, A and Bakar, M.A. and Maleque, Md. Abdul and Ilyas, R.A. and Supian, A.B.M. (2022) Properties of recycled metal matrix composites. In: Recycling of plastics, metals, and their composites. CRC Press, Tailor and Francis Group, pp. 93-107. ISBN 978-0-367-70974-7

Adebisi, Adetayo A. and Maleque, Md. Abdul and Bello, Kamilu Adeyemi (2020) Interface study of SiCp/6061Al composite. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 456-461. ISBN 978-0-12-813196-1

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Adebisi, Adetayo A. (2020) Processing of ceramic composite coating via TIG torch welding technique. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 523-535. ISBN 978-0-12-813196-1

Hossain, Mohammad Sayeed and Maleque, Md. Abdul (2020) Residual stress analysis for sustainable structural integrity assessment of an engineering component. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 548-556. ISBN 978-0-12-813196-1

Maleque, Md. Abdul and Idris, Nazrin and Rahman, Mohammad M. and Sayeed Hossain, Mohammad (2020) Particulate composite protective coating using conventional melting approach. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 510-516. ISBN 9780128035818

Musa, Moh HA and Maleque, Md. Abdul and Y Ali, Mohammad (2020) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 439-444. ISBN 978-0-12-813196-1

Azwan, Muhammad and Maleque, Md. Abdul and Rahman, Mohammad Mustafizur (2020) TIG Torch melting as surface engineering technology. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier, UK, pp. 629-637. ISBN 978-0-12-813196-1

Kabbashi, Nassereldeen Ahmed and Nour, Abdurahman Hamid and Al-Khatib, Ma'an Fahmi Rashid and Maleque, Md. Abdul (2019) Removal of chromium with CNT coated activated carbon for waste water treatment. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier 2020, Elsevier, pp. 1-11. ISBN 9780128131954

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Suriani, M.J. and YUsriah, L. (2019) Review of development and characterization of sugar palm fiber–reinforced polymer composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 15-40. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S. M. (2019) Sugar palm starch biopolymer: extraction and processing. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 41-55. ISBN 978-1-4987-5302-9

Maleque, Md. Abdul (2018) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 1-7. (In Press)

Maleque, Md. Abdul and Shaha, Sugrib Kumar and Razali, Nurul Nadirah (2018) Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-7. ISBN 978-0-12-803581-8 (In Press)

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Faizul, M. and Sapuan, S. M. (2014) Automotive bottom structure composite materials selection: digital logic and knowledge based system approach. In: Engineering composites: properties and applications. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 191-210. ISBN 9789673443963

Maleque, Md. Abdul and ., Mohd Nizam (2011) Conceptual design of folding bicycle frame with light weight materials. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 81-85. ISBN 9789674181642

Maleque, Md. Abdul (2011) Fabrication of metal matrix composite automotive brake rotor: part 1. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 80-85. ISBN 9789674182311

Maleque, Md. Abdul (2011) Fabrication of metal matrix composite automotive brake rotor: part 2. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 86-89. ISBN 9789674182311

Afdzaluddin, Atiqah and Maleque, Md. Abdul (2011) High Density Polyethylene (HDPE) as an alternative material in fuel tank production. In: Advances in materials engineering (vol. 1). IIUM Press, Kuala Lumpur, pp. 126-131. ISBN 9789674181673

Afdzaluddin, Atiqah and Maleque, Md. Abdul (2011) High Density Polyethylene (HDPE) as an alternative material in fuel tank production. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 164-171. ISBN 9789674181659

Rahman, Md. Mustafizur and Khan, Md. Ashikur Rahman and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach. In: Computers and simulation in modern science. Computers and simulation in modern science, V (Vol.5). WSEAS Press, pp. 107-113. ISBN ISBN: 978-960-474-300-1, ISSN: 1762-6882

Maleque, Md. Abdul and Afdzaluddin, Atiqah (2011) Reverse engineering for automotive fuel tank. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 121-126. ISBN 9789674181642

Maleque, Md. Abdul and ., Arifutzzaman (2011) Reverse engineering of automotive piston. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 86-91. ISBN 9789674181642

Maleque, Md. Abdul (2011) Technology of moulding for composite auto brake rotor. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 7-12. ISBN 9789674182311

Maleque, Md. Abdul and Adebisi, Adetayo A. (2011) Thermal profile analysis of composite brake rotor. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 165-171. ISBN 9789674181673

Maleque, Md. Abdul and Karim, M., Rezaul (2011) Wear of aluminium matrix composite – effects of reinforcement combination. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 90-95. ISBN 9789674182311

Maleque, Md. Abdul (2011) A critical review of metal matrix composite brake rotor. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674182311

., Arifutzzaman and Maleque, Md. Abdul (2011) The tribological behaviour of Al-Si automotive piston material. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 75-80. ISBN 9789674181642

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Proceeding Paper

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hassan, Masjuki and Bello, Kamilu Adeyemi (2023) Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23), Kuala Lumpur, Malaysia. (Unpublished)

Azhari, Azmir and Idriss, A. N. M. and Maleque, Md. Abdul (2023) Comparative study on performance characteristics of modified alloy steels by TIG and water jet peening processes. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Polat, Muhammed Alperen and Gülten, Gökhan and Totik, Ya¸sar and Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Çetin, Safa and Efeoglu, Ihsan (2023) Synthesis and characterization of Ta/TaN coatings with CFUBMS-HiPIMS technology. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Cetin, Safa and Efeoglu, Ihsan and Rahman, Md Mustafizur (2023) Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Masjuki, H. H. and Low, K. O. and Ali, Mohammad Yeakub (2023) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Maleque, Md. Abdul (2022) Wear and corrosion behavior of metallic coated surface under exposure to biodiesel�. In: ICAMME2022, Virtual. (Unpublished)

Maleque, Md. Abdul and Sarifuddin, Norshahida and Haji Hassan, Masjuki and Rahman, M. M. (2022) Recent advances in hybrid coating on metallic materials using liquid additive manufacturing. In: International Conference on Mechanical Engineering (ICME 2022), 16-19 February 2022, Lahore, Pakistan.

Md Idriss, Ahmed Nazrin and UNSPECIFIED and Maleque, Md. Abdul (2022) Demographic changes by the vickers microhardness surface indentations on the TiC metal matrix composite TIG melted track. In: 3rd Malaysian International Tribology Conference, 28-30 September 2020, Virtual.

Bello, Kamilu Adeyemi and Dodo, Rayyan Mamuda and Babaswasun, Muhammad Sani and Umma, Abdullahi and Adebisi, Abdulmumin Adetayo and Maleque, Md. Abdul (2022) Effect of two-step austempering heat treatment on the dry sliding wear behavior of austempered ductile cast iron. In: 37th Annual Conference and Annual General Meetings, 26th - 29th October 2022, University of Abuja, Nigeria.

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, Md. Mustafizur (2022) Flat plate and evacuated tube collectors solar water heater system – a comparative study. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,, 21 – 23 June 2021, Kuala Lumpur, Malaysia.

Md Idriss, A. N. and Kasolang, S. and Maleque, Md. Abdul (2022) Literature survey on manufacturing alumina/aluminum MMC by stir casting and their wear behaviors with and without solid lubrication. In: 3rd Malaysian International Tribology Conference, 28-30 September 2020, Virtual.

Cetin, S Y and Maleque, Md. Abdul and Masjuki, H H (2022) Simulation of wear map for biodiesel interacted automotive materials. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21 - 23 June 2021, Kuala Lumpur, Malaysia.

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2022) Synthetization of TiC surface hardening using TIG melting technique - the effect of working distance. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Hassan, Masjuki and K.O., Low and Ali, Mohammad Yeakub (2021) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November, Universiti Teknologi Brunei ( Virtual ). (Unpublished)

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, Md. Mustafizur (2021) Comparative study on performance of flat plate and evacuated tube collectors solar water heater system. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,, 22 – 23rd June, KOE, IIUM (virtual). (Unpublished)

Fuhaid, Mutlag Sh. and Maleque, Md. Abdul and Murali, R V and Rahaman, M. A. Rahaman (2021) Natural and industrial origin reinforced LM6 aluminum composite materials – A comparative study. In: Recent Innovations in Science & Technology (RIST 2021), 19-20 June 2021, Virtual platform (India). (Unpublished)

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2021) The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Fuhaid, Mutlag Sh. and Maleque, Md. Abdul and Venkat, Murali and Abd. Rahman, Mohamed (2021) Natural and industrial origin reinforced LM6 aluminum matrix composite materials – a comparative study. In: International Conference on Recent Innovations in Science and Technology (RIST 2021), 19-20 June 2021, Virtual. (In Press)

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, M. M. and Bello, K. A. (2021) Sustainable energy simulation for water heating system. In: 2021 Sustainable Engineering and Industrial Technology Conference, Nigeria. (In Press)

Maleque, Md. Abdul (2020) A systematic literature review. In: Webinar on Sytematic Literature Review, 22nd September 2020, Kuala Lumpur. (Unpublished)

Zetty Akhta, A. M. and Rahman, Md Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul (2020) Effect of TiO2 and Al2O3-ethylene glycol-based nanofluids on cutting temperature and surface roughness during turning process of AISI 1018. In: "Energy Security and Chemical Engineering Congress 2019, ESChE 2019", 17 - 19 July 2019, Parkroyal Resort Penang.

Musa, M. H. A. and Maleque, Md. Abdul and Hossain, M.S. and Ravishankar, S.R. and Al-Shiblib, A. and Coyle, E.D. (2020) Evaluation of sustainable micro-alloyed HSLA steel for pipeline application. In: International Gas Research Conference 2020 (IGRC 2020), 24-26 Feb 2020, Muscat, Oman. (Unpublished)

Maleque, Md. Abdul and Halim, Zahurin and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and A.R., Nur Farina and Parveez, Bisma (2019) Sustainable lightweight composite materials. In: Tech Plan Demo Day in Malaysia 2019, 20 July 2019, SME Corporation, KL Sentral, KL. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md. Abdul (2019) A new approach for composite coating development on duplex stainless steel (DSS). In: Kulliyyah Of Engineering Research, Innovation And Commercialisation Exhibition (KERICE) 2019, 18 September 2019, Gombak, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and A.R., Nur Farina and Paijan, Lailatul Harina and Abdullah, M. Azwan (2018) Lighter weight and energy efficient eco-siC composite for motorbike brake disc application. In: 29th INTERNATIONAL INVENTION, INNOVATION AND TECHNOLOGY EXHIBITION (ITEX) 2018, 10-12 May 2018, KLCC. (Unpublished)

Maleque, Md. Abdul (2018) TIG torch technique for hard face surfacing. In: TNBR Remaco presentation, 19 April 2018, Selangor. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina and Halim, Zahurin (2018) Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdullah, Muhammad Azwan and Jamal, Nur Ayuni Jamal (2018) A new approach for composite coating development on metallic materials. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.

Maleque, Md. Abdul (2018) Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel. In: World Summit on Advances in Science, Engineering and Technology (Cambridge Summit 2018), 4th-6th Jan. 2018, Cambridge, United Kingdom. (Unpublished)

Maleque, Md. Abdul and Afiq, Muhammad (2018) Melting of SiC powders preplaced duplex stainless steel using TIG welding. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Lailatul, P.H. and Fathaen,, A. A. and Norinsan, K. and Haider, Julfikar (2018) Nitride alloy layer formation of duplex stainless steel using nitriding process. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Musa, Mukhtaruddin Iqbal A. and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul (2017) TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization. In: 1st International Workshop on Multifunctional Materials (IW2M-2017), 10th-12th October 2017, Mostaganem, Algeria. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles. In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017), 16th-19th Oct. 2017, Melaka.

Maleque, Md. Abdul (2017) Writing a high impact research paper. In: Seminar/Talk at Faculty of Science & Technology, University of Mostaganem Algeria, 9th Oct. 2017, Mostaganem, Algeria. (Unpublished)

Maleque, Md. Abdul (2017) Particulate composite surface by TIG torch surfacing. In: Advanced Materials Characterization Technique (AMCT 2017), 16th-17th August 2017, Genting Highlands, Pahang. (Unpublished)

Musa, Hussin Abdullrhman and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2017) Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Afiq, M. (2017) Particulate preplaced TIG melted surface layer of duplex stainless steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina (2017) Eco-friendly automotive disc brake and cylinder liner (Eco SiC). In: IIUM World Prosumer Convention 2017, 7th-11th August 2017, Kuala Lumpur. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Effect of energy input on wear behaviour of SiC surface modified layer duplex stainless steel. In: 5th Malaysia-Japan Tribology Symposium (MJTS2017), 28th-30th Aug. 2017, Kuala Lumpur.

Maleque, Md. Abdul (2017) Overview of Malaysian standards on alloy steels. In: Seminar on MS The Implementation of Malaysian Standards For Alloy Steels,, 1st Aug. 2017, Concorde Hotel Shah Alam. (Unpublished)

Maleque, Md. Abdul (2017) Materials processing technology with Islamic perspective. In: KOE Islamization Seminar, 26 May 2017, KOE Islamization Office. (Unpublished)

Maleque, Md. Abdul and Bello, K A and Adebisi, A A and Dube, A (2017) Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and , W. Saffina and Ahmed, A. S and Ali, M. Y. (2017) Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

H, Lailatul and Maleque, Md. Abdul (2017) Hardfacing of duplex stainless steel using melting and diffusion processes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

M. H. A, Musa and Maleque, Md. Abdul and Ali, M. Y. (2017) Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Adebisi, Adetayo Abdulmumin and -, Normaizatul Akma (2017) Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Bello, K. A. (2017) Noble hybrid composite coated low alloy steel for high temperature applications. In: Malaysia Technology Expo (MTE 2017), 16th-18th Feb. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina (2017) Modified surface of duplex stainless steel using TIG torch melting and diffusion techniques. In: Malaysia Technology Expo (MTE 2017), 16th-18th Feb. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina (2017) Modified surface of duplex stainless steel using tig torch and diffusion techniques. In: Malaysia Technology Expo (MTE 2017), 16th-18th February 2017, Kuala Lumpur, Malaysia. (Unpublished)

Lailatul, P.H. and Maleque, Md. Abdul (2017) Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Material & Processing Technologies Conference, Chennai, India.

P.H., Lailatul and Maleque, Md. Abdul (2016) Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8th-11th Nov 2016, Kuala Lumpur. (Unpublished)

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. (2016) Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Adebisi, A. A. and Maleque, Md. Abdul and Bello, K. A. (2016) Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Lailatul, H. and Bello, K.A. and Azwan, M. (2016) Lubricated wear behaviour of SiC reinforcement on TI-6AL-4V alloy based on Taguchi approach. In: 4th Malaysia-Japan Tribology Symposium 2016, 25th-26th August 2016, Universiti Teknologi Malaysia. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md. Abdul and -, Suryanto (2016) Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and ., W. Saffin and Ahmed, A. S (2016) Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Adebisi, A. A. and ., N. Izzati (2016) Fracture surface behaviour of Al-Mg-SiCp composite materials. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia.

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Bello, K.A. (2016) Investigation of parametric influence on the properties of Al6061-SiCp composite. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Gombak.

Abdullrhman Hossin, Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2016) Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Salim, Nur Akma (2016) Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Abdullah, Umma and Yaacob, Iskandar Idris and Ali, Yousaf (2016) Characterization of ball-milled carbon nanotube dispersed aluminum mixed powders. In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3), 6th-10th October, 2014, Miskolc-Lillafüred, Hungary.

Tajuddin, Maisarah and Ahmad , Zuraida and Sulaiman, Mohd Faris Haikal and Halim, Zahurin and Maleque, Md. Abdul (2016) Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Adebisi, Adetayo A. and Maleque, Md. Abdul and Ali , Mohammad Yeakub and Bello, Kamilu Adeyemi (2015) Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.

Maleque, Md. Abdul (2015) Composite brake rotor: energy savings and wear performance. In: IRIIE 2015, 29 September 2015, Cultural Activity Centre (CAC), IIUM. (Unpublished)

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and Mirdha, S. (2015) Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique. In: 3rd International Doctoral Student Symposium with Partner Universities, 25-28 February 2015, Hokkaido University, Sapporo, Japan.

Maleque, Md. Abdul (2015) Hardsurface layer of TiC embedded alloy steel by TIG torch technique. In: The 2015 ICBTS International Academic Research Conference in Europe & America, 22nd-24th October 2015, The Movenpick Hotels & Resorts Berlin, Germany.

Maleque, Md. Abdul (2015) Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application. In: PECIPTA2015, 4-6 December 2015, Kuala Lumpur. (Unpublished)

Adeyemi, Bello K. and Maleque, Md. Abdul and Ahmad, Zuraida and Adebisi, Adetayo A. and Mirdha, S. (2015) Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.

Maleque, Md. Abdul and Ghazal, Belal Ahmed and Ali, Mohammad Yeakub and Hayyan, Maan and Ahmed, Abu Saleh (2015) Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting. In: International Conference on Functional Materials and Metallurgy, ICoFM 2014, 17-18 Sep 2014, Pulau Pinang.

Adelek, S.A. and Maleque, Md. Abdul (2014) TIG melted surface modified titanium alloy for automotive cylinder liner application. In: International Conference on Advanced Technology & Sciences (ICAT’14), 12th-15th August 2014, Antalya, Turkey.

Maleque, Md. Abdul and Bello , K. and Ahmad , Zuraida (2014) Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Cultural Activity Center (CAC), Internatioanal Islamic University Malaysia. (Unpublished)

Maleque, Md. Abdul (2014) Contemporary light weight composite material -milestone towards automotive brake rotor application. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and K.A., Bello and Ahmad, Zuraida (2014) Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014, 20-22 Feb 2014, Kuala Lumpur, Malaysia. (Unpublished)

Paruka, Perowansa and Maleque, Md. Abdul and Md Shah, Md Kamal (2014) Performance of hybrid aluminium–composite columnar tube under axial crush force. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and ghazal , Belal Ahmed and Ali, Mohd Yeakub and Hayyan, Maan and Hashim, Mohd Ali and Ahmed, Abu Saleh (2014) Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14), 23th-25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and A., Atiqah and Iqbal, M. (2013) Development of kenaf hybrid composite for structural applications. In: IRIIE 2013, 19-20 February 2013, Cultural Activities Centre , International Islamic Univesity Malaysia. (Unpublished)

Maleque, Md. Abdul (2013) Energy saving composite automotive brake rotor prototype. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013, 19-20th February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2013) Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor. In: 24th International Invention, Innovation and Technology Exhibition (ITEX 2013), 9-11 May 2013, KLCC. (Unpublished)

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2013) High performance aluminium composite brake rotor. In: International Conference And Exposition On Invention Of Institutions Of Higher Learning (PECIPTA 2013), 7th-9th Nov. 2013, Kuala Lumpur Convention Centre, Malaysia.

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28-29 August 2013, Hotel Equatorial , Malacca.

Maleque, Md. Abdul (2013) Physical property of multi walled carbon nanotube reinforced aluminium nano composite. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013, 19-20th February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Ahmed, Abu Saleh and Khan, Sarfaraj and Hamdan, Sinin and Rahman, Md. Rezaur and Islam, Md Saiful and Maleque, Md. Abdul (2012) Biodiesel production from Macro Algae as a green fuel for diesel engine. In: 5th Engineering Conference (ENCON12), 10-12 July 2012, Kuching, Sarawak.

Maleque, Md. Abdul and Adebisi, Adetayo A. and Ahmed, Abu Saleh (2012) A novel approach for the prediction of thermal distribution in automotive brake rotor. In: 5th Engineering Conference (ENCON12), 10-12 July 2012, Kuching, Sarawak.

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Zamani, A. R. (2012) Development of waste coir-reinforced aluminum matrix automotive brake pad material. In: IRIIE2012, 21-22 February 2012, CAC, IIUM. (Unpublished)

Arifutzzaman, A. and Maleque, Md. Abdul (2012) Reverse engineering of automotive piston. In: IRIIE2012, 21-22 Feb 20112, CAC, IIUM. (Unpublished)

Md Idriss, A. N. and Maleque, Md. Abdul and Yaacob, Iskandar Idris and -, Normiza and -, Noraini and Mridha, Shahjahan (2012) Failure of woven fiber glass epoxy composite under charpy impact loading. In: The 21st Scientific Conference of the Microscopy Society of Malaysia , 22 - 24 November 2012, Kota Bahru, Malaysia..

A., Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and A. R. , Mohamed (2012) Physical property of multi walled carbon nanotube reinforced aluminium nano composite. In: World Research & Innovation Convention on Engineering & Technology (WRICET2012), 3 - 5 December 2012, KL. (In Press)

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi.

Mridha, Shahjahan and Md. Idriss, A. N. and Maleque, Md. Abdul and -, Suryanto and Mohamad, Souad A. (2011) Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, A. and N., Atiqah (2011) Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, malaysia.

Adebisi, Adetayo A. and Maleque, Md. Abdul (2011) Medelling aspect of corrosive wear under biodiesel. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and A., Atiqah and R. J., Talib and Halim, Zahurin (2011) New natural fibre reinforced composite brake friction material. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and A. R., Zamani and R. J., Talib (2011) Tribological study of A1 based natural fibre reinforced composite brake pad materials. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul (2011) Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and Adebisi, Adetayo A. (2011) Energy efficient lighter weight aluminium matrix composite automotive brake motor. In: International Conference On Harnessing Technology (ICHT) 2011, , 13-14 February, Muscat, Oman.

Adebisi, Adetayo A. and Maleque, Md. Abdul (2010) Effect of multiple-particle size reinforced silicon carbide(SICP) on properties of aluminium matrix composite. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Kaiser, Mohammad Rejaul and Anuar, Hazleen and Maleque, Md. Abdul (2010) Fabrication of biodegradable composite – an implication of plasticizer. In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010), 31 May-1 June 2010, Pekan, Pahang.

Shaha, Sugrib Kumar and Maleque, Md. Abdul and Dyuti, S. and Haque, Md. Mohafizul (2010) Design and development of mild steel die for production of hip-bone joint. In: International Chemical and Environmental Engineering Conference 2010, 26-28 November 2010, Kuala Lumpur.

Maleque, Md. Abdul and Arifutzzaman, A. K. H. A. Ma and Rahman, Md. Mustafizur (2010) Knowledge based expert system application for automative piston material selection. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Maleque, Md. Abdul and Kaiser, Mohammad Rejaul (2010) An overview of advanced material characterization techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Maleque, Md. Abdul and Dyuti, S. and Rahman, Md. Mustafizur (2010) Material selection method in design of automotive brake disc. In: World Congress on Engineering 2010 , 30 June to 2 July 2010, London, United Kingdom.

Maleque, Md. Abdul and Sarker, Dyuti (2010) Development of material selection method for the application children bicycle frame. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Maleque, Md. Abdul and Sarker, Dyuti (2010) Materials for bicycle frame system - a case study on the development of selection method. In: The third international conference on structure, processing and properties of materials, 24 - 26 February, 2010, Dhaka.

Adetayo A., Adebisi and Maleque, Md. Abdul (2010) Mold preparation for stir casting of aluminium matrix composite brake motor: a review. In: World Engineering Congress 2010, 2 - 5 August, 2010, Kuching, Sarawak.

Maleque, Md. Abdul and Sarker, Dyuti (2010) The development of an optimum material selection process for the design of automative brake rotor. In: 2010 International Conference on Process Engineering and Advanced Materials (icpeam2010), 15th-17th June 2010, Kuala Lumpur Convention Centre, Kuala Lumpur.

Monograph

Maleque, Md. Abdul and Mat Jusoh, Ahmad Haziq and Salehudin, Nabilah Farhana and Yee, Sen Tat and Din, Mohd Idrus and Adenan, Rashimah and Abdullah, Mohamad Akhir and Mat Zain, Mohd Hafizy and Lim, Sooi San and Chum, Pak Kuan and Ahmad Salman, Shafiq Wazzan and Yazid, Zurawati and Mat Isa, Mohd Azlan and Mohd Saleh, Mohd Khairul Annuar and Chua, Seok Cheng and Idris, Mohd Nazri and Karam Singh, Salvinder Singh and Lee, Hooi Lan and Tan, Chin Guan and Pang, See How (2023) Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). Policy Paper. Department of Standard Malaysia (DSM), Malaysia.

Maleque, Md. Abdul (2020) Stainless steels for general purposes - Part 1: Corrosion-resistant flat products (ISO 16143-1:2014, MOD) (First revision). Policy Paper. Department of Standards Malaysia, Cyberjaya, Selangor.

Maleque, Md. Abdul (2017) Hot rolled alloy steel wire rod for pre-stressed steel - Specification. Other. DSM, KL.

Maleque, Md. Abdul and Wan Yusoff, Wan Ahmad Yusmawiza and Samat, Noorasikin and Ali, Mohammad Yeakub and Rahman, Md Mustafizur and Adetayo A., Adebisi (2017) Prototype development of light weight aluminium matrix composite automotive brake rotor. Project Report. UNSPECIFIED. (Unpublished)

Maleque, Md. Abdul (2016) Erosion corrosion and tribological behavior of TIG torch composite layers. Project Report. Research Management Centre, International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Ani, Mohd Hanafi and Samat, Noorasikin and Ahmed, Abu Saleh and Rahman, Md Mustafizur (2016) Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul (2016) Alloy steel bars for special application bolting materials. Other. UNSPECIFIED.

Maleque, Md. Abdul (2012) Characterization of ceramic materials after machining by EDM. Research Report. s.n, Kuala Lumpur. (Unpublished)