Items where Author is "Konneh, Mohamed"
 | Up a level |
Article
Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Konneh, Mohamed (2020) Stability of micro dry wire EDM: OFAT and DOE method: OFAT and DOE method. International Journal of Advanced Manufacturing Technology, 106 (9-10). pp. 4247-4261. ISSN 02683768
Banu, Asfana and Ali, Mohammad Yeakub and Abd Rahman, Md Nizam and Konneh, Mohamed (2019) Investigation of process parameters for stable micro dry wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 103 (1-4). pp. 723-741. ISSN 0268-3768 E-ISSN 1433-3015
Bagum, Mst. Nasima and Konneh, Mohamed and Amin, A. K. M. Nurul (2018) Prediction and experimental validation of temperature rise in ductile mode end milling of soda-lime glass. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3437-3447. ISSN 0268-3768
Abdulkareem, Sulaiman and Khan, Ahsan Ali and Konneh, Mohamed (2018) Analysis of microlayer defects of a functionally graded titanium alloy by electrical discharge machining. Engineering and Applied Science Research, 45 (1). pp. 17-22. ISSN 2539-6161 E-ISSN 2539-6218
Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. E-ISSN 2278-0149 (In Press)
Abdulkareem, Suleiman and Khan, Ahsan Ali and Shah, Qasim Hussain and Konneh, Mohamed (2017) Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering, 9 (1). pp. 39-43. ISSN 2229-838X
Amin, A. K. M. Nurul and Begum, Mst. Nasima and Fathiah, Noor and Konneh, Mohamed and Ariff, Tasnim Firdaus (2016) An experimental approach to determine the critical depth of cut in brittle-to-ductile phase transition during end milling of soda lime glass. Arabian Journal for Science and Engineering, 41 (11). pp. 4553-4562. ISSN 1319-8025 E-ISSN 2191-4281
Konneh, Mohamed (2016) Precision surface grinding of silicon carbide. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 51-58. E-ISSN 0128-1852
Bagum, Nasima and Amin, A. K. M. Nurul and Konneh, Mohamed and Mohd Zaib, Noor Fathiah (2015) Multi-response optimizations for high speed ductile mode machining of soda lime glass. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17341-17350. ISSN 1819-6608
Konneh, Mohamed and Zaini, Mohamad Hamzi (2015) Performance evaluation of drilling tools during machining plain Carbon Fiber Reinforced Polymer (CFRP). ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17386-17390. ISSN 1819-6608
Konneh, Mohamed and Iqbal, Mohammad and Ani, Hanfi and Yayah, Mohd Zulhari (2015) Influence of machining parameters on temperature when drilling carbon fiber reinforced polymer (CFRP) using coated diamond drills. Advanced Materials Research, 1115. pp. 74-79. ISSN 1662-8985
Konneh, Mohamed and Abdallah, Kassim Abdulrahman and Sudin, Izman and Jusoh, Mohd Amirudin (2015) Investigation of delamination at exit of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills. Advanced Materials Research, 1115. pp. 80-85. ISSN 1662-8985
Konneh, Mohamed and Sudin, Izman and Sidek, Atiah Abdullah and Salleh, Muhammad Salahuddin (2015) Surface roughness in drilled carbon fiber reinforced polymer (CFRP)composite using diamond coated ball-nose drills. Advanced Materials Research, 1115. pp. 90-95. ISSN 1662-8985
Iqbal, Mohammad and Konneh, Mohamed and Ani, Mohd Hanafi and Abdallah, Kassim Abdulrahman and Binting, Muhammad Faruq (2015) Cutting temperature in high speed milling of silicon carbide using diamond coated tool. International Journal of Mechanical And Production Engineering, 3 (4). pp. 62-66. ISSN 2320-2092 E-ISSN 2321-2071
Konneh, Mohamed and Al Hazza, Muataz Hazza Faizi and Sidek, Atiah Abdullah (2015) Evaluating delamination at entry of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills. Advanced Materials Research, 1115. pp. 64-69. ISSN 1022-6680
Konneh, Mohamed and Sudin, Izman and Kassim, Abdullah Abdul Rahman (2015) Milling damage on carbon fibre reinforced polymer using tiAIN coated end mills. Journal of Physics: Conference Series, 628 (Con. 1). pp. 1-8. ISSN 1742-6588 E-ISSN 1742-6596
Yahaya, B. and Izman, S. and Konneh, Mohamed and Redzuan, Norizah (2014) Microwave hybrid heating of materials using susceptors- a brief review. Advanced Materials Research, 845. pp. 426-430. ISSN 1022-6680
Iqbal, Mohammad and Konneh, Mohamed and Md Said, Ahmad Yasir and Mohd Zaini, Azri Fadhlan (2014) Surface quality of high speed milling of silicon carbide by using diamond coated tool. Applied Mechanics and Materials, 446-44. pp. 275-278. ISSN 1660-9336
Konneh, Mohamed and Sudin, Izman and Padil, Mirza Emmil Dzahi and Roszat, Rosniza (2014) Surface roughness study of milled carbon fiber reinforced polymer (CFRP) composite using 4 mm 2-flute titanium aluminum nitride (TiAlN) coated carbide end mills. Advanced Materials Research, 887-88. pp. 1101-1106. ISSN 1022-6680
Iqbal, Mohammad and Purnomo, Muhammad Ridwan Andi and Mohd Imra, Muhammad Ammar and Konneh, Mohamed and Karim, A.N. Mustafizul (2012) The study on production performances of part transporter in flexible manufacturing system by using simulation method. Advanced Materials Research, 576. pp. 714-717. ISSN 1022-6680
Konneh, Mohamed and Tamsir, Afzeri and Triblas Adesta, Erry Yulian (2012) Development of an economical lapping process. Advanced Materials Research, 472-47. pp. 2348-2353. ISSN 1022-6680
Konneh, Mohamed and Iqbal, Mohammad and Faiz , Nik Mohd Azwan (2012) Diamond coated end mills in machining silicon carbide. Advanced Materials Research, 576. pp. 531-534. ISSN 10226680
Konneh, Mohamed and Iqbal, Mohammad and Kasim, Md Asnawi and Mohd Isa, Nurbahiah (2012) High speed milling of silicon carbide with diamond coated end mills. Advanced Materials Research, 576. pp. 535-538. ISSN 1022-6680
Iqbal, Mohammad and Purnomo, Muhammad Ridwan Andi and Mohd Imra, Muhammad Ammar and Konneh, Mohamed and Karim, A.N. Mustafizul (2012) The study on production performances of part transporter in flexible manufacturing system by using simulation method. Advanced Materials Research, 576. pp. 714-717. ISSN 1022-6680
Abdur-Rasheed, Alao and Konneh, Mohamed (2011) Optimization of precision grinding parameters of silicon for surface roughness based on taguchi method. Advanced Materials Research, 264 . pp. 997-1002. ISSN 1022-6680
Alam, S. and Amin, A. K. M. Nurul and Konneh, Mohamed and Patwari, Anayet U. (2011) Surface roughness prediction in high speed flat end milling of Ti-6Al-4V and optimization by desirability function of RSM. Advanced Materials Research, 264-26. pp. 1166-1173. ISSN 1022-6680
Afzeri, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2011) Virtual simulation and remote desktop interface for CNC milling operation. Advanced Materials Research, 264/65. pp. 1643-1647. ISSN 1662-8985
Alao, Abdur-Rasheed and Konneh, Mohamed (2011) Surface finish prediction models for precision grinding of silicon. International Journal Advances Manufacturing Technology, 58 (9). pp. 949-967. ISSN 0268-3768
Sudin, Izman and Abdul-Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohd Nazim and Nalisa, Adila and Konneh, Mohamed (2011) Effect of carburization process on adhesion strength of ti carbide layer on titanium alloy substrate. Advanced Materials Research, 197. pp. 219-224. ISSN 1022-6680
Alao, Abdul-Raheed and Konneh, Mohamed (2011) Application of taguchi and box-behnken designs for surface roughness in precision grinding of silicon. International Journal of Precision Technology, 2 (1). pp. 21-38. ISSN 1755-2079 (O), 1755-2060 (P)
Alao, Abdur-Rasheed and Konneh, Mohamed (2011) An experimental study on precision grinding of silicon using diamond grinding pins. International Journal Materials Engineering Innovation (IJMATEI), 2 (3-4). pp. 325-345. ISSN 1757-2754 E-ISSN 1757-2762
Abdulkareem, Suleiman and Khan, Ahsan Ali and Konneh, Mohamed (2010) Cooling effect on electrode and process parameters in EDM. Materials and Manufacturing Processes, 25 (6). pp. 462-466. ISSN 1532-2475 (O), 1042-6914 (P)
Alam, Md. Shah and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Konneh, Mohamed (2010) Prediction and investigation of surface response in high speed end milling of Ti-6Al-4V and optimization by genetic algorithm. Advanced Materials Research, 83-86. pp. 1009-1015. ISSN 1022-6680
Abdulkareem, Suleiman and Ali Khan, Ahsan and Konneh, Mohamed (2010) Reducing electrode wear using cryogenic cooling during electrical discharge machining. Advanced Materials Research, 83-86. pp. 672-679. ISSN 1022-6680
, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2009) Remote operation of CNC milling through virtual simulation and remote dekstop interface. World Academy of Science, Engineering and Technology, 53. pp. 64-67. ISSN 1307-6884
Alao, A-R and Konneh, Mohamed (2009) A response surface methodology based approach to machining processes: modelling and quality of the models. International Journal Experimental Design and Process Optimisation (IJEDPO), Vol. 1 (2/3). 240- 261 . ISSN 2040-2252 (Print); 2040-2260 (Online)
Book Chapter
Konneh, Mohamed and Ghazali, Abdul Halim (2011) Engineering project management in automotive industry. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 247-253. ISBN 9789674181598
Konneh, Mohamed and Shad, Nur Jannah and Saharudin, Noor Fazlin (2011) Study of the effect of different electrodes on material removal rate, electrode wear rate and surface roughness in the EDM of S-STAR. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 272-278. ISBN 9789674181598
Konneh, Mohamed and Mukhtar, Muhammad (2011) Surface roughness studies in die-sink EDM of tungsten carbide using copper tungsten electrode. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 264-271. ISBN 9789674181598
Konneh, Mohamed and -, Abdul Halim (2011) Surface study when finish grinding silicon using resin bonded diamond cup wheel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 257-263. ISBN 9789674181598
Proceeding Paper
Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul (2018) Surface morphology study in high speed milling of soda lime glass. In: 3rd International Conference on the Science and Engineering of Materials (ICoSEM 2017), 24th-25th Oct. 2017, Kuala Lumpur.
Bagum, Mst. Nasima and Konneh, Mohamed and Ali, Mohammad Yeakub (2018) Establishing relationship between process parameters and temperature during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
Bagum, Mst. Nasima and Konneh, Mohamed and Abdullah, Kasim Abdulrahman. . and Ali, Mohammad Yeakub (2018) Chip morphology as a performance predictor during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.
Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Mohamed Ariff, Tasnim Firdaus (2018) Tool wear mechanisms during cutting of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.
Konneh, Mohamed and Bagum, Mst Nasima and Amin, Akm Nurul M.Nurul and Asyah, Amira Fatin (2017) Investigation of heat assisted high speed end milling of soda lime glass for surface generation. In: 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE), 23-24 November 2016, Petaling Jaya, Selangor, Malaysia.. (In Press)
Konneh, Mohamed and Bagum, Mst. Nasima and Mohamed Ariff, Tasnim Firdaus and Yeakub Ali, Mohammad (2017) Machinability of soda lime glass in high speed end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.
Konneh, Mohamed and N. M. A., Rosli (2015) Experimental investigation of the effect of cutting tool coating on delamination during of milling Metal Matrix Composite (MMC). In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 20th-22th Sept. 2015, Johor Bahru, Johor. (Unpublished)
Konneh, Mohamed and Sudin, Izman and Abdullah, Kassim Abdulrahman (2014) Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills. In: International Conference on Innovative Trends in Multidisciplinary Academic Research (ITMAR 2014), 20th-21st October 2014, Istanbul, Turkey.
Sudin, Izman and Mohd. Yusof, Noordin and Safari, Habib and Engku Abu Bakar, Engku Mohd Nazim and Aluwi Shakir, Noor Adila and Konneh, Mohamed (2010) Effect of high temperature chemical etching on surface roughness of tungsten carbide substrate. In: 11th Asia Pacific Industrial Engineering and Management Systems (APIEMS) Conference, 7-10 Dec 2010, Melaka, Malaysia. (In Press)
Izman, S. and Abdul-Kadir, Mohammed Rafiq and Anwar, Mahmood and Nazim, E. M. and Khor, E. K. and Konneh, Mohamed (2010) Effect of pickling and mechanical surface treatment methods on adhesion strength of Ti oxide layer formed on Titanium alloy substrate. In: 2010 34th IEEE/CPMT InternationalElectronic Manufacturing Technology Symposium (IEMT), 30th Nov - 2nd Dec 2010, Melaka, Malaysia.
Konneh, Mohamed and Amin, A. K. M. Nurul and Afzeri, Afzeri and Ahmarofi, A. A. (2009) Development of a low cost lapping process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
Konneh, Mohamed and Izman, S. and Ali, Mohammad Yeakub (2006) An investigation on morphology of hard-brittle silicon surface by diamond grinding. In: International Conference on Manufacturing Science and Technology (ICOMAST 2006), 28-30 August 2006, Melaka, Malaysia.
Ali, Mohammad Yeakub and Ong, A. S. and Konneh, Mohamed (2005) Micromilling of tungsten carbide using focused ion beam. In: International Conference on Mechanical Engineering 2005 (ICME2005), 28-30 December 2005, Dhaka, Bangladesh.
Monograph
Konneh, Mohamed (2012) Preliminary investigation into surface finish and damage when grinding silicon carbide. Research Report. s.n, Kuala Lumpur. (Unpublished)