Items where Author is "Hilmy, Irfan"

Article

Roslan, Muhamad Hafizuddin and Bahar, Rubina and Hilmy, Irfan (2019) Experimental investigation on fresh water production using air gap membrane distillation. International Journal of Engineering & Technology, 7 (6). pp. 229-234. ISSN 2277-3878

Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Hilmy, Irfan and Badran, Marwan A A (2019) Convergence and error analysis of a bi-quadratic triangular galerkin finite element model for heat conduction simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 78-86. ISSN 2289-7879

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hilmy, Irfan (2019) Hardware improvement of FDM 3D printer: issue of bed leveling failures. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (4). pp. 603-614. E-ISSN 2278-3075

Saud FEMD Alazemi, Saud and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2018) Indentation mechanism in rotary hammer forging process: analytical and numerical approach. International Journal of Engineering Materials and Manufacture, 3 (4). pp. 190-199. E-ISSN 0128-1852

Mahmud, Khairus Syakirah and Nasry, Nasrul Ashraf and Hilmy, Irfan and Ismail, Md Yusof (2015) Development of a quality check station in a pharmaceutical industry to achieve zero defect production using PDCA cycle. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17421-17426. ISSN 1819-6608

Nasry, Nasrul Ashraf and Mahmud, K. S. and Hilmy, Irfan and Ismail, Md Yusof and Basri, R. H. (2015) Energy consideration in pharmaceutical factory layout. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17427-17432. ISSN 1819-6608

Nasry, Nasrul Ashraf and Mahmud, Khairus Syakirah and Hilmy, Irfan and Ismail, Md Yusof and Basri, R. H. (2015) Energy consideration in pharmaceutical factory layout. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17427-17432. ISSN 1819-6608

Mustafa, Yusri and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2015) Low temperature solder alloys for ultrasonic soldering of glass. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9717-9722. ISSN 1819-6608

Hilmy, Irfan and Wahab, M. Abdel and Adesta, Erry Yulian Triblas and Mohamed Ariff, Tasnim Firdaus (2015) Damage detection based on the natural frequency shifting of a clamped rectangular plate model. Journal of Physics: Conference Series, 628. 012034-1. ISSN 1742-6588 (P), 1742-6596 (O)

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Mat Roseh, Mohd Shahrul Fahmi and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and -, Suryanto (2015) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. Advanced Materials Research, 1115. pp. 59-63. ISSN 1022-6680

Zakaria, Mohammad and -, Suryanto and Hilmy, Irfan (2015) Effects of surfactant on corrosion behavior of carbon steel in simulated crude oil. Advanced Material Research, 1115. 223-225. ISSN 1662-8985

Mahmood, Mahmood Hameed and Harun, Nurliyana and -, Suryanto and Hilmy, Irfan (2015) Physical properties of electroless nickel-tungsten coating on mild steels obtained from acetic bath. Advanced Materials Research, 1115. pp. 230-233. ISSN 1662-8985

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Riza, Muhammad (2014) Heat generation performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 529 (2014). pp. 200-205. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Ibrahim, Husna Izzati and Roselley, Noor Sheila and Iqbal, Mohammad and Hilmy, Irfan and -, Suryanto (2014) Enhancing tool life of silicon nitride inserts via hybrid microwave post sintering. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 80-85. ISSN 1991-8178

Hilmy, Irfan and Adesta, Erry Yulian Triblas (2014) Welding performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 446-47. pp. 660-664. ISSN 1660-9336

Hasmoni, Mohamed Hadzri and Hilmy, Irfan and Goh, Kian Liang (2013) Gastrointesinal: an unusual cause of gastric outlet obstruction. Journal of Gastroenterology and Hepatology, 28 (3). p. 585. ISSN 0815-9319

Abdel Wahab, Magd and Hilmy, Irfan and Hojjati-Talemi, Reza (2013) On the use of low and high cycle fatigue damage models. Key Engineering Materials, 569-70. pp. 1029-1035. ISSN 1013-9826

Wahab, Magd Abdel and Hilmy, Irfan and Ashcroft, Ian Anthony and Crocombe, Andrew David (2010) Evaluation of fatigue damage in adhesive bonding: Part 1: Bulk adhesive. Journal of Adhesion Science and Technology, 24 (2). pp. 305-324. ISSN 0169-4243 E-ISSN 1568-5616

Proceeding Paper

Arief, Rudi Kurniawan and Sukindar, Nor Aiman and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2023) Analysis of the adjusting bolts system’s contribution to levelling error of the heated bed in FDM 3D printer. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kuala Lumpur.

Prabowo, Herry Agung and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2020) Total productive maintenance implementation’s barriers and enablers in Indonesian manufacturing companies. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 Feb.-9 April 2020, Dubai, United Arab Emirates.

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hannaf, Riyadh Ali Abdullah and Hilmy, Irfan (2020) A design consideration of heated bed's rapid levelling tool based on von misses stress using FEA simulation. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 February - 9 April 2020, Dubai; United Arab Emirates.

Adesta, Erry Yulian Triblas and Hilmy, Irfan and ,, Avicenna and Agusman, D. (2019) Toward real time IoT based paste monitoring system for small to medium enterprise (SME). In: 2nd Forum in Research, Science, and Technology (FIRST 2018), 30th–31st October 2018, Palembang, Indonesia.

Haiyam, F. N. and Hilmy, Irfan and Sulaeman, Erwin and Mohamed Ariff, Tasnim Firdaus and Adesta, Erry Yulian Triblas (2018) Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Liana, N. A. and Amsyar, N. and Hilmy, Irfan and Yusof, M. D. (2018) Lean energy analysis of CNC lathe. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Adesta, Erry Yulian Triblas and Avicenna, Avicenna and Hilmy, Irfan and Che Daud, Mohd Radzi (2018) Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Nasry, Nasrul Ashraf and Mahmud, Khairus Syakirah and Hilmy, Irfan and M. I., Ismail and Hassan Basri, Rodziah (2017) Implementation of lean manufacturing to blend with good manufacturing practice at Minda Tulus Industries Sdn. Bhd. for improved performance. In: 3rd National Conference on Knowledge Transfer (NCKT'16), 30th Nov.-1st Dec. 2016, Pulau Pinang.

Hameed, Hameed Mahmood and Harun, Nurliyana and -, Suryanto and Hilmy, Irfan (2014) Physical properties of electroless nickel-tungsten coating on mild steels obtained from acetic bath. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Samsul Bahrim, Nur’atiyah Najwa and Aini Nurrasyidah, Azhar and Mohd Shahar, Siti Fatimah (2014) Development of design structure matrix of product architecture case study: multi purpose CNC router. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Samsul Bahrim, Nur’atiyah Najwa and Azhar, Aini Nurrasyidah and Mohd Shahar, Siti Fatimah (2014) Development of design structure matrix of a product architecture. Case study: multi purpose CNC router. In: IIUM Engineering Congress 2014, 23rd - 25th Sept. 2014, Sunway Putra Hotel, Kuala Lumpur, Malaysia. (Unpublished)

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Fahmi, Shahrul and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and Suryanto, - (2014) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. In: IIUM Engineering Congress : 3rd International Conference on Mathematical Application in Engineering 2014, 23rd - 25th September 2014, Kuala Lumpur.

Zakaria, Mohammad and Suryanto, - and Hilmy, Irfan (2014) Effects of surfactant on corrosion behavior of carbon steel in simulated eor crude oil. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Mohamed Ariff, Tasnim Firdaus and Firdaus, Muhammad and Norhafiz, Mohd and Iqbal, Mohammad and Hilmy, Irfan (2014) Improved performance in aluminium oxide tool inserts via post sintering using hybrid microwave energy. In: 2nd International Conference on Emerging Trends in Scientific Research, 1-2 November, 2014, Kuala Lumpur.

Wahab, M. Abdel and Hilmy, Irfan and Hafiz, Tauqeer and Talemi, R. Hojjati (2012) Finite element modelling of damage fracture and fretting fatigue. In: 15th International Conference on Applied Mechanics & Mechanical Engineering, 29-31 May 2012, Cairo, Egypt.